Model PM7200 User Guide Integrated Amplifier PM7200U(表1,表2,表4,他) Page 4 03.12.17, 11:19 AM Adobe PageMaker 6.
CONTENTS Engligh ............................................................................................................................................................................................. page 1 Figures ........................................................................................................................................................................................... page 35 PM7200U(表1,表2,表4,他) Page 6 03.12.17, 11:19 AM Adobe PageMaker 6.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3.
20. Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 21. Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c.
Figure numbers refer to the illustrations located at the back of this User’s Manual. Numbers assigned to parts and controllers match the callout numbers used inside the illustrations. ALL UPPER-CASE BOLD type indicates the name of a connection or controller as it is actually marked on the amplifier. (Figure 1) ENGLISH CONNECTIONS ABOUT THIS USER’S GUIDE CONNECTING A TUNER Note the following important precautions whenever operating the amplifier.
FRANÇAIS ENGLISH CONTROLS, CONNECTORS, !3 CLASS A INDICATOR AND INDICATORS This indicator lights when the amplifier is in the Class A operation mode. See “@3 Class A Switch” for details. (Figure 2) !4 TAPE,CD-R/MD SELECTOR BUTTONS Press one of these switches to select a connected tape deck or CD-R/MD for monitoring or playback. Pressing a TAPE,CD-R/MD SELECTOR button causes the indicator above it to light.
OPERATION 1 Press this switch while amplifier power is turned off to switch between Class A (25W, 8 ohms) and Class AB (95W, 8 ohms) amplifier operation. The CLASS A indicator is lit while Class A operation is selected, and Class AB operation is indicated when the CLASS A indicator is not lit.
ENGLISH TAPE DECK, CD-R/MD OPERATION USING THE REC SELECTOR Use the REC SELECTOR E to specify the type of recording you want to perform. 1. The OFF setting cuts off all signal output from the REC OUT jacks. Note that REC SELECTOR Eshould normally be in the OFF setting except when you are recording to tape. The OFF setting shortens the signal path within the amplifier, which minimizes crosstalk and other factors that can cause deterioration of the sound.
CD BUTTON The RC8000PM remote control unit can be used to control any Marantz AV equipment that has a remote sensor, as well as other Marantz equipment connected to the main equipment’s remote control bus. The buttons of the remote control unit are arranged on the control panel according to functional groups as shown in the illustration below. See the relevant user manuals for details on combination equipment as operation content may differ depending on the equipment combined.
ENGLISH CD-R BUTTON AUX 2 BUTTON The following are the functions assigned to control buttons after the CD-R amplifier source button is pressed. The following are the functions assigned to control buttons after the AUX 2 amplifier source button is pressed.
When operating the remote control unit (RC8000PM), point its transmitter directly at the remote sensor, which is located on the front of the amplifier. Make sure the remote control unit is no further than about 5 meters from the remote sensor. Remote control operation may not be possible if the remote control unit’s transmitter is not pointing directly at the remote sensor, or if there is an obstruction between the transmitter and sensor.
FRANÇAIS ENGLISH CARE AND MAINTENANCE TROUBLESHOOTING This section describes care and maintenance that you must perform in order to make sure your Marantz amplifier performs at the level for which it is designed. Be sure to unplug the amplifier from the mains supply before any care and maintenance. Whenever you have a problem with the amplifier, check the following points before requesting service. What may seem to be a serious malfunction is often the result of a simple operational error.
MODEL PM7200 TECHNICAL SPECIFICATIONS Power output (class AB operation) RMS 8 ohms (20 Hz-20 kHz) .......................................................................................................... 95 W DIN 8 ohms .................................................................................................................................... 105 W THD at 8 ohms RMS rated output ................................................................................................ 0.03% Damping factor ...
34 PM7200(SPEC, ILLUST) Page 34 03.12.17, 11:20 AM Adobe PageMaker 6.
Tape Deck Processor Input Output Output Input Tuner PROCESSOR SPEAKER SYSTEMS IN IN SYSTEM 1 : SYSTEM 2 : SYSTEM 1 AND 2 : CD-R/MD MINIMUM 8 OHMS MINIMUM 8 OHMS MINIMUM 16 OHMS OUT OUT R SYSTEM 2 L R SYSTEM 1 L IN AUX2 TAPE OUT AUX1 TUNER R L CD R L PHONO Output CD player Turntable NOTE: Turn the knobs on the speaker terminals by hand. (Do not use a tool to turn the knobs.
PROCESSOR IN SPEAKER SYSTEMS SYSTEM 1 : MINIMUM 8 OHMS SYSTEM 2 : MINIMUM 8 OHMS SYSTEM 1 AND 2 : MINIMUM 16 OHMS IN CD-R/MD OUT OUT + IN TAPE OUT AUX2 AUX1 TUNER R Ð SYSTEM 2 Ð R L + AC OUTLETS AC 120V〜60HZ SWITCHED 1.
www.marantz.com You can find your nearest authorized distributor or dealer on our website. JAPAN Marantz Japan, Inc. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan U.S.A. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. EUROPE Marantz Europe B.V. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands is a registered trademark. Printed in China PM7200U(表1,表2,表4,他) 2003/12 Page 5 MITf 03.12.17, 11:19 AM Adobe PageMaker 6.
