Basic instructions Owner’s Manual DVD Information NR1504 Advanced instructions AV Surround Receiver
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
n CAUTIONS ON INSTALLATION WARNINGS z z Wall zz For proper heat dispersal, do not install this unit in a confined space, such as a bookcase or similar enclosure. • More than 12 in. (0.3 m) is recommended. Information DVD z z Advanced instructions • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust.
Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference.
Features (ACM1HB) Q2 Cable label................................................................................ 1 y u o For optimum realism and stunning dynamic range, the power amplifier section features discrete power devices (not integrated circuitry). By using high current, high power discrete power devices, the amplifier is able to easily drive high quality speakers.
Basic instructions Cautions on handling • Before turning the power on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home for long periods of time, be sure to unplug the power cord from the power outlet.
Basic instructions Here we explain the connections and basic operation methods for this unit. F Setup vpage 23 F Playback (Basic operation) vpage 30 F Network content vpage 47 For speaker connections, see page 79.
Important information Make connections before using this unit. To create a home theater that can play back higher quality video and audio by fully utilizing the capabilities of this unit and your video devices, connect this unit to each of your video devices with HDMI cables. NOTE nn HDMI devices vpage 9 vpage 10 vpage 10 vpage 10 vpage 10 vpage 10 vpage 10 vpage 10 Advanced instructions • The menu screen is only displayed on TV connected to this unit via HDMI.
Important information This unit is equipped with two types of video input connectors (HDMI and composite video) and two type of video output connectors (HDMI and composite video). NOTE GFlow of video signalsH Video device HDMI-compatible TV This unit Output (MONITOR OUT) HDMI signal HDMI signal HDMI connector HDMI connector Input HDMI connector HDMI connector • The menu screen is only displayed on TV connected to this unit via HDMI.
If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections. Connections with an HDMI cable offer the following benefits that can not be achieved with other connection methods.
Connecting HDMI devices nnAbout ARC (Audio Return Channel) function This function plays TV audio on this unit by sending the TV audio signal to this unit via the HDMI cable. If a TV without the ARC function is connected via HDMI connections, video signals of the playback device connected to this unit are transmitted to the TV, but this unit can not play back the audio from the TV. If you want to enjoy surround audio for TV program, a separate audio cable connection is required.
Connecting HDMI devices NOTE • The audio signal from the HDMI output connector (sampling frequency, number of channels, etc.) may be limited by the HDMI audio specifications of the connected device regarding permissible inputs. • When connecting a TV that does not support the ARC function, an audio cable connection is required in addition to the HDMI cable. In this case, refer to “Connecting a TV” (vpage 13) for the connection method.
Connecting HDMI devices Basic instructions Connecting this unit to video devices via HDMI connections Video camcorder Cables used for connections HDMI OUT Audio and video cable (sold separately) HDMI cable Game console Media player CD player HDMI OUT HDMI OUT HDMI OUT HDMI OUT HDMI OUT GFront panelH GRear panelH DVD 10 Information • When connecting a device that supports Deep Color, please use a “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”.
Connecting HDMI devices nnAbout Content Type This function was added with the HDMI standard. It automatically makes settings suitable for the videooutput type (content information). This unit supports the following HDMI functions: nnAbout 3D function nnDeep Color (vpage 130) This unit supports input and output of 3D (3 dimensional) video signals of HDMI. To play back 3D video, you need a TV and player that provide support for the HDMI 3D function and a pair of 3D glasses.
Connection methods for various devices Cables used for connections Changing the source assigned to connectors Video cable (sold separately) This unit can change the source that is assigned to the HDMI IN, DIGITAL AUDIO IN, VIDEO IN and AUDIO IN connectors.
Connecting other devices nnAudio connection The following methods are available for connecting to this unit. • This section describes how to connect when your TV does not support ARC (Audio Return Channel). For instructions on HDMI connections, see “Connecting this unit to a TV via HDMI connections” (vpage 9). • To listen to TV audio through this unit, use the optical digital connection.
Connecting other devices nnAudio connection The following methods are available for connecting to this unit. Use either of the methods to make a connection. The numbers prefixed with connectors indicate the recommendation order. The smaller the number is, the higher playback quality is achieved. This section describes how to connect when your satellite tuner or cable TV does not support HDMI connections. For instructions on HDMI connections, see “Connecting HDMI devices” (vpage 7).
Connecting other devices nnAudio connection The following methods are available for connecting to this unit. This section describes how to connect when your Blu-ray disc player or DVD player that does not support HDMI connections. For instructions on HDMI connections, see “Connecting HDMI devices” (vpage 7). a AUDIO IN (Blu-ray/DVD) connector This makes an analog audio connection.
Connecting other devices nnVideo connection The following methods are available for connecting to this unit. This section describes how to connect when your media player does not support HDMI connections. For instructions on HDMI connections, see “Connecting HDMI devices” (vpage 7). a VIDEO IN (MEDIA PLAYER) connector This makes an analog video connection. Media player The sections in the connection diagram are also available for connections.
Connecting other devices Supported iPod models • You can enjoy music stored on an iPod or USB memory device. • For operating instructions see “Playing an iPod” (vpage 32) or “Playing a USB memory device” (vpage 35). • iPod classic Cables used for connections Basic instructions Connecting an iPod or USB memory device to the USB port To connect an iPod to this unit, use the USB adapter cable that was supplied with the iPod.
Connecting other devices nnAudio connection The following methods are available for connecting to this unit. You can enjoy CD sound with the player connected by digital or analog cables. a AUDIO IN (CD) connector This makes an analog audio connection. CD player AUDIO AUDIO OUT L R L R L R Advanced instructions a The sections in the connection diagram are also available for connections. To connect devices to these connectors, you must set up input connectors.
Connecting other devices Direction of broadcasting station • Connect the FM antenna supplied with the unit to enjoy listening to radio broadcasts. • After connecting the antenna and receiving a broadcast signal (vpage 38 “Listening to FM/AM broadcasts”), fix the antenna with tape in a position where the noise level becomes minimal.
Connecting other devices Wireless receiver (RX101) • You can connect a wireless receiver (RX101, sold separately) to play back music on your Bluetooth device with this unit. • To do this, switch the input source to “M-XPort” (vpage 30 “Selecting the input source”). • This unit supports the A2DP standard of the Bluetooth profile. • See also the manuals for your wireless receiver and Bluetooth device.
• Playback of network audio such as Internet Radio and from your media server(s) • Playback of music content from online streaming services • Using the Apple AirPlay function • Operation on this unit via the network nnBroadband internet connection nnModem In addition, if updated firmware becomes available for this unit, the updated information is delivered from us to this unit over the internet via your home network. You can then download and install the latest firmware.
Basic instructions Connecting the power cord After completing all the connections, insert the power plug into the power outlet. Advanced instructions To household power outlet (AC 120 V, 60 Hz) Power cord (supplied) NOTE DVD Information • Do not plug in the power cord until all connections have been completed. However, when the “Setup Assistant” is running, follow the instructions in the “Setup Assistant” (C page 7) screen for making connections.
Here, we explain “Audyssey® Setup”, which allows you to automatically make the optimal settings for your speakers, and “Network”, which allows you to connect this unit to a home network (LAN). This unit lets you play via your home network (LAN) music files stored on a computer and music content such as that from Internet Radio.
Set up speakers (Audyssey® Setup) Prepare the included Setup and measurement microphone Mount the Setup and measurement microphone on a tripod or stand and place it in the main listening position. Setup and measurement microphone Sound receptor Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. For details, see your subwoofer’s manual.
Set up speakers (Audyssey® Setup) 4 Detection & Measurement (Main) This step automatically checks the speaker configuration and speaker size, and calculates the channel level, distance, and crossover frequency. It also corrects distortion in the listening area. Select “Start” and then press ENTER. When measuring begins, a test tone is output from each speaker. Audyssey Setup C onn e c t the calibr at ion micr ophone t o t he S E T U P M IC input on t he fr ont t he A V re c e i v er .
Set up speakers (Audyssey® Setup) the 9 Move measurement Setup and microphone to position 2, select “Continue”, and then press ENTER. The measurement of the second position starts. Measurements can be made in up to six positions. 10 Repeat step 9, measuring positions 3 to 6. When measurement of position 6 is completed, “Measurements Complete.” message is displayed. Audyssey Setup a 11 Select “Calculation” and then press ENTER.
Set up speakers (Audyssey® Setup) Store ui to select the item you 12 Use want to check, and then press ENTER. Finish 13 Select “Store” and then press ENTER. Save the measurement results. Audyssey Setup Audyssey Setup Speaker Config. Distances Levels Crossovers Audyssey Setup Ch e c k p ro ce s s ing r e s ult . T o p roc e ed, s e le ct “St or e ”. Y ou c an s e t D y nam ic V olu me fu n c t ion, wh ic h au t om at ic ally adju s t s volu m e le ve l f or all c on t e n t .
Set up speakers (Audyssey® Setup) NOTE • An error message is displayed if Audyssey® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Then perform Audyssey® Setup again. • If the result still differs from the actual connection status after re-measurement or the error message still appears, it is possible that the speakers are not connected properly.
Set up speakers (Audyssey® Setup) This function enables you to check the measurement results and equalizer characteristics after Audyssey® Setup. This unit can be connected to a home network (LAN) to listen to Internet Radio or play back music files and still image (JPEG) files stored on a computer. Audyssey Setup 1 Connect the LAN cable (vpage 21 “Connecting to a home network (LAN)”). 2 Turn on this unit (vpage 30). This unit performs automatic network setup due to the DHCP function.
Basic instructions Playback (Basic operation) Important information Setup (vpage 23) nn Playing a Blu-ray Disc player/DVD player (vpage 31) nn Playing a CD player (vpage 31) nn Playing an iPod (vpage 32) nn Playing a USB memory device (vpage 35) nn Listening to FM/AM broadcasts (vpage 38) Selecting a listening mode (Sound Mode) (vpage 72) Turning the power on Press POWER X to turn on power to the unit. The desired input source can be selected directly.
Important information Use VOLUME df to adjust the volume. • The volume display method varies depending on the “Scale” setting (vpage 96). GAdjustable rangeH 0.0 0.5 – 98.0 nn When the “Scale” setting (vpage 96) is “–79.5dB – 18.0dB” GAdjustable rangeH – – –.– –79.5dB – 18.0dB • The variable range differs according to the input signal and channel level setting. You can also adjust the master volume by turning VOLUME on the main unit. 1 q Turn on the power of the subwoofer and player.
Listening to music on an iPod The iPod display modes include “From iPod” and “On-Screen”. By default, “From iPod”, where you directly operate the iPod itself while looking at the iPod screen, is set. To change to “On-Screen”, where you perform operations while having the iPod information displayed on the TV screen, see “Setting operation mode (iPod Browse Mode)” (vpage 33). to the USB port (vpage 17). POWER X to turn on 2 Press power to the unit. Press iPod/USB to switch the 3 input source to “iPod/USB”.
Playing an iPod In this mode, various lists and screens during playback on the iPod are displayed on the TV screen. This section describes the steps up to playing back tracks on the iPod in “On-Screen”. The option menu screen is displayed. The “iPod Browse Mode” screen is displayed. Option iPod Browse Mode Video Select Display mode From iPod On-Screen P P Playable Music file files Video file Active buttons z Remote control unit (This unit) P iPod P zzOnly the sound is played.
Playing an iPod nnPerforming random playback (Random) 1 1 Press OPTION with “iPod Browse Mode” set to “On-Screen”. The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER. The option menu screen is displayed. 2 Use ui to select “Random”, then press ENTER.
Important information • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit. • This unit is compatible with USB memory devices in “FAT16” or “FAT32” format. • This unit is compatible with MP3 files conforming to “MPEG-1 Audio Layer-3” standards. • File types that this unit can play back and specifications are shown below.
Playing a USB memory device the USB memory device 1 Connect to the USB port (vpage 17). iPod/USB to switch the 2 Press input source to “iPod/USB”. [1/9] D&M1 D&M2 D&M3 Music1 Music2 Make this setting at “M-DAX” (vpage 96) in the menu. You can use the M-DAX function to improve the fidelity of compressed audio sources such as MP3 files. The M-DAX has selectable levels of restoration. The default setting is “Off”. nnGoing back to the previous screen Press o or BACK.
Playing a USB memory device Basic instructions nnUSB memory device operation buttons Function PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name etc.
Listening to FM/AM broadcasts How to tune in Press TUNER to switch the input 1 source to “TUNER”. GTV ScreenH GTV ScreenH FM/AM FM FM 92.10MHz AUTO CH 1 TUNER TUNE+/- Tune CH+/- Preset OPTION GDisplay of this unitH Option GDisplay of this unitH 01 FM FM/AM 92.10MHz The option menu screen is displayed. The Band screen is displayed. GTV ScreenH FM When listening to an FM broadcast. AM When listening to an AM broadcast.
Listening to FM/AM broadcasts Make this setting at “Now Playing” (vpage 101) in the menu. The default setting is “Always On”. When “Auto Off” is set, the on-screen display is turned off 30 seconds after an operation. Press uio p while the display is off to return to the original screen.
Listening to FM/AM broadcasts You can enter the receiving frequency directly to tune in. 1 Press TUNER to switch the input source to “TUNER”. 2 Press OPTION. ui to select “Direct Tune”, 3 Use then press ENTER. 4 Use ui to select a number and press p. The screen that lets you enter the frequency is displayed. GTV ScreenH Direct Tune Basic instructions nnTuning in by entering the radio frequency (Direct Tune) FM ---.--MHz The option menu screen is displayed.
Listening to FM/AM broadcasts Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. The option menu screen is displayed. The list of already preset channels is displayed. • To preset other stations, repeat steps 1 to 4. 17 – 24 Preset Memory 25 – 32 CH CH CH CH CH CH CH CH 1 2 3 4 5 6 7 8 FM FM FM FM FM FM FM FM 92.10MHz 92.30MHz 92.50MHz 92.70MHz 93.10MHz 93.50MHz 93.70MHz 94.
Listening to FM/AM broadcasts You can change the mode for tuning into FM broadcasts. If you cannot tune in automatically with “Auto” mode, then change the mode to “Manual” and tune in manually. 4 Use o p to select tuning mode, then press ENTER. GTV ScreenH Press TUNER to switch the input 1 source to “TUNER”. 2 Press OPTION. Use ui to select “Tune Mode”, 3 then press ENTER. Tune Mode Auto GTV ScreenH GDisplay of this unitH Option FM 92.
Listening to FM/AM broadcasts Up to 56 stations can be preset. If “Auto Preset” is performed after performing “Preset Memory”, the “Preset Memory” settings will be overwritten. The option menu screen is displayed. GTV ScreenH FM 92.
Listening to FM/AM broadcasts You can set the name to the preset broadcast station or change it. Up to eight characters can be input. The option menu screen is displayed. The Preset Name screen is displayed. GTV ScreenH Option FM 92.10MHz TUNE+/- Tune CH+/- Preset OPTION Option GDisplay of this unitH • Each time o p is pressed, the setting is changed as shown below. 1–8 9 – 16 49 – 56 17 – 24 41 – 48 25 – 32 33 – 40 GTV ScreenH Preset Name Preset Group CH 1 FM 92.10MHz CH 2 FM 92.
Listening to FM/AM broadcasts You can set in advance, the stations you do not want to be displayed when tuning in, by groups or by stations. The preset skip setting is useful when tuning in, because only your favorite stations are displayed. The option menu screen is displayed. The Preset Skip screen is displayed. GTV ScreenH stations you want to skip. • Each time o p is pressed, the setting is changed as shown below.
Listening to FM/AM broadcasts 1 While the Preset Skip screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for.
Listening to Internet Radio Internet Radio refers to radio broadcasts distributed over the Internet. Internet Radio stations from around the world can be received. Listening to Internet Radio Important information 1 Prepare for playback. GPlayable broadcast station typesH Supported file types Internet Radio WMA (Windows Media Audio) P MP3 (MPEG-1 Audio Layer-3) P q Check the network environment, then turn on this unit’s power (vpage 21 “Connecting to a home network (LAN)”).
Listening to Internet Radio Make this setting at “M-DAX” (vpage 96) in the menu. You can use the M-DAX function to improve the fidelity of compressed audio sources such as content from Internet Radio stations. The M-DAX has selectable levels of restoration. The default setting is “Off”. Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu.
Listening to Internet Radio There are many Internet Radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations. If this is the case, then please use vTuner, an Internet Radio station search website specifically designed for this unit. You can use your PC to search Internet Radio stations and add them as your favorites. This unit can play radio stations added to vTuner.
Basic instructions Playing back files stored on a PC and NAS This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. Important information Sampling frequency Bit rate Extension WMA (Windows Media Audio) 32/44.1/48 kHz 48 – 192 kbps .wma GSupported file typesH MP3 (MPEG-1 Audio Layer-3) 32/44.1/48 kHz 32 – 320 kbps .mp3 32/44.1/48/88.2/96/ 176.4/192 kHz – .wav 32/44.1/48 kHz 16 – 320 kbps .aac/ .m4a/ .mp4 32/44.
Playing back files stored on a PC and NAS Here, we apply the settings to share music files stored on a PC and NAS on the network. nnSharing media stored in PC If you are using a Media Server, be sure to apply this setting first. When using Windows Media Player 12 (Windows 7 / Windows 8) NOTE Perform this procedure after changing the control panel display to “Category”. options”.
Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. 2 Press NETWORK. Make this setting at “M-DAX” (vpage 96) in the menu. You can use the M-DAX function to improve the fidelity of compressed audio sources such as MP3 files. The M-DAX has selectable levels of restoration. The default setting is “Off”. nnSwitching the screen display Press STATUS on the main unit.
Playing back files stored on a PC and NAS nnMedia Server operation buttons Function PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name OPTION Text Search / Repeat playback / Random playback / Slideshow Time / Save to Favorite / Slideshow / Video Select uio p Cursor operation / Next/Previous (ui) / Fast-forward/Fast-reverse (Press and hold, ui)z ENTER (Press and release) Enter ENTER (Press and hold) Stop nn Searching content with keywords (Text
nnAbout Flickr (vpage 55) nnAbout SiriusXM (vpage 61) Flickr is an online photograph sharing service that started in 2004. You can use the this unit to view photographs that have been made public by Flickr users. You do not need an account to use Flickr. To view photographs that you recorded yourself, you need an account in order to upload these photographs to the Flickr server. For details, see the Flickr homepage. http://www.flickr.
Using online services You can view photographs shared by particular users, or all of the photographs shared on Flickr. nnViewing photographs shared by particular users 1 Prepare for playback. 2 Press NETWORK. uio p to select “Flickr”, 3 Use then press ENTER. Favorites Operations available through the OPTION button 6 After inputting the “Contact”, press Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu.
Using online services to select “All Content”, then press ENTER 1 orUsepui . Flickr [1/2] Add Flickr Contact All Content 2 Option Use ui to select the folder, and then press ENTER or p.
Using online services 1 Prepare for playback. a Pandora account, use ui to select “I 4 Ifhaveyoua have 5 Input “Email address” and “Password”. Pandora account”, then press ENTER or p. 2 Press NETWORK. uio p to select “Pandora”, 3 Use then press ENTER. Network Favorites Pandora Account Pandora Account Email address I have a Pandora account OK BACK Cancel Enter • If you do not have a Pandora account, press i to select “I am new to Pandora”. The URL of Pandora and activation code are displayed.
Using online services nn Displaying your desired video on the monitor during audio playback (Video Select) (vpage 69) nnCreating a new station You can create up to 100 radio stations. to select “New Station”, then press ENTER 1 orUsepui . My Station Use ui to select “Search by Artist” or “Search by 3 Track”, then press ENTER. You can search and display a list by track or artist.
Using online services Use ui and select the radio station (“D&M2 Radio”) that you want to listen to, and press ENTER or p. nnGiving Feedback and Managing Stations You can personalize your stations by providing feedback. Press p while a track is playing. The Pandora menu screen is displayed. Menu [1/8] I like this track D&M2 Radio nnSign out Disassociate this unit from your Pandora account. Use ui to select “Sign Out”, 1 then press ENTER or p.
Using online services Basic instructions nnPandora operation buttons Operation buttons Function PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name Video Select uio p Cursor operation / Skips the current track, subject to skip limit (i) ENTER (Press and release) Enter ENTER (Press and hold) Stop Return Setup menu 9 Skips the current track, subject to skip limit 1 Playback 3 Pause DVD Information BACK SETUP Advanced instructions OPTION
Using online services Over 120 channels of the SiriusXM programming you love, including commercial-free music plus sports, talk, news and entertainment. Listen anywhere on your computer or smartphone. 1 Prepare for playback. Network Favorites Sign in Start Trial Enter 5 Input the “Username” and “Password”. • For character input, see page 92. 6 Select the “Sign in”, and then press ENTER.
Using online services Disassociate this unit from your SiriusXM account. ui to select “Sign Out”, then press ENTER or 1 Use p. the popup menu appears, use o p to select 2 When “Yes”, then press ENTER.
Using online services Introduce your Marantz to a whole new world of music. With Spotify, you can enjoy instant access to millions of songs. A Spotify Premium subscription is required. For details, see the Spotify homepage. http://www.spotify.com 4 If you have a Spotify account, then press ENTER. Spotify Introduce your Marantz to a whole new world of music. With Spotify, you can enjoy instant access to millions of songs. A Spotify Premium subscription is required. Just subscribe at spotify.
Using online services The Spotify menu screen is displayed. [1/3] Track-Artist Star this track Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu. You can easily find and use the desired function. nn Performing repeat playback (Repeat) (vpage 65) Browse “Artist name” Browse “Album name” Star this track Adds a star to the selected track.
nn Searching content with keywords (Text Search) (vpage 65) Searching content with keywords (Text Search) USB Internet Radio Performing repeat playback (Repeat) USB Media Server The option menu screen is displayed. nn Performing repeat playback (Repeat) (vpage 65) 1 While content is playing, press OPTION. 2 Use ui to select “Repeat”, then press ENTER. The option menu screen is displayed. The keyboard input screen is displayed.
Convenient functions USB Media Server Spotify 1 While content is playing, press OPTION. 2 Use ui to select “Random”, then press ENTER. During random playback, each time playback of a track is completed, another track is randomly selected for playback from tracks in the folder. Therefore, it's possible that you may hear a track played back more than once during random playback. The option menu screen is displayed.
Convenient functions Playing back content added in “Save to Favorite” There are two ways to add content to favorites: q Add to favorites from the Option menu w Add to the FAVORITE STATION button 1 Use uio p to select 2 “Favorites”, then press ENTER. nnAdd to favorites from the Option menu (Save to Favorite) Press NETWORK. Network You can add up to 100 items as favorites for all sources (Internet Radio and Media Server). 1 While content is playing, press OPTION.
Convenient functions 1 Press NETWORK. Use uio p to select 2 “Favorites”, then press ENTER. USB Media Server 2 3 Press OPTION. 4 Use ui to select “Slideshow”, then press ENTER. Play back a music file or Internet Radio station (vpage 47, 52). Internet Radio Playing back still images in sequential order (Slideshow Time) You can play back still image (JPEG) files stored on a USB memory device or Media Server and pictures on Flickr website as a slide show. The display time can also be set.
Convenient functions This unit can display video from a different source on TV during audio playback. You can set this for each input source. USB TUNER NETWORK The option menu screen is displayed. Internet Radio Option Save to Favorite Now Playing Slideshow Video Select Title Artist Album MP3 128kbps Off On Off Disable Video Select mode. On Enable Video Select mode. you selected “On” in step 3, press i and select 4 If“Source”.
zzAvailable as a free download from the App Store. nnStreaming music stored in iPhone, iPod touch, or iPad directly to the unit 1 Make the Wi-Fi settings for iPhone, iPod touch, or iPad. • For details, see your device’s manual. iTunes 10, or later, on a Mac or Windows PC 1 Install that is connected to the same network as this unit. Click the AirPlay icon and select “Multiple”. Turn this unit ON. 1 2 2 Check the speakers you want to use. Set “IP Control” (vpage 111) to “Always On” for this unit.
AirPlay function With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. Devices General Playback Sharing Store Parental Devices Advanced Device backups: Information Delete Backup ...
This unit allows you to enjoy various kinds of surround and stereo playback modes. Multi-channel audio formats are provided on popular movie and music disc formats such as Blu-ray and DVD, as well as being supported by digital broadcasting, and even by streaming movies and music from internet-based subscription services. This unit automatically generates a list of all the playable sound modes based on the input audio format and the current speaker setup configuration and displays the list on the screen.
Selecting a listening mode Auto surround playback This mode is for playback with higher sound quality than in “DIRECT” mode, by turning off the front panel display panel, which can eliminate faint low level noise from creeping into sensitive analog circuitry. This mode detects the type of input digital signal, and automatically selects the corresponding mode for playback. device the selected device 1 Play (vpage 31 – 63). 2 Press PURE to select “AUTO”. Auto surround playback begins.
Selecting a listening mode • The following listening modes can be selected using the MOVIE, MUSIC, GAME, and PURE buttons. • Adjust the sound field effect with the menu “Surr.Parameter” (vpage 94) to enjoy surround sound the way you like it.
Selecting a listening mode STEREO AUTO z2 2-channel z1 DOLBY PLg Game z3 MULTI CH STEREO VIRTUAL Multi-channel STEREO z4 AUTO z2 Dolby Digital DOLBY DIGITAL Dolby TrueHD DOLBY TrueHD Dolby Digital DOLBY DIGITAL Plus Plus DTS SURROUND DTS DTS 96/24 DTS-HD HI RES DTS-HD / DTS-HD MSTR DTS Express DTS Express PCM multiMULTI CH IN channel MULTI CH STEREO VIRTUAL DIRECT All PURE DIRECT AUTO z2 DVD z1 2-channel also includes analog input.
Selecting a listening mode Dolby listening mode Original listening mode Listening mode type DOLBY PLg Listening mode type MULTI CH STEREO VIRTUAL AUTO listening mode DTS listening mode Listening mode type Listening mode type DTS NEO:6 AUTO Description This mode can be selected when a DTS NEO:6 decoder is used to play back 2-channel source in 5.1-channel surround sound. There is a “Cinema” mode optimized for movie playback, and a “Music” mode optimized for music playback.
Advanced instructions Here we explain functions and operations in more detail so that you can maximize your enjoyment with this unit.
Procedure for speaker settings Speaker installation Speaker installation • Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Here, we explain how to install the speakers using a typical example. • The speaker impedance should be from 6 to 16 Ω/ohms. When 5.1-channel speakers are installed FL Use the illustration below as a guide for how high each speaker should be installed. The height does not need to be exactly the same.
Connecting the speaker cables Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly. nn Connecting 5.1-channel speakers (vpage 81) nn Connecting 2.
Speaker connection Audio cable (sold separately) Speaker cable Connecting the subwoofer nnAbout the speaker cable label (supplied) for channel identification The channel display section for speaker terminals on the rear panel is color-coded for each channel to be identifiable. Use a subwoofer cable to connect the subwoofer.
Speaker connection Basic instructions Connecting 5.1-channel speakers Connecting 2.1-channel speakers Advanced instructions FL FR SW SW C SL SR NOTE • For speaker cable connections, see page 80. • For speaker impedance, see page 79. NOTE • For speaker cable connections, see page 80. • For speaker impedance, see page 79.
Connecting the REMOTE CONTROL connectors Remotely control a Marantz Blu-ray player by the Marantz Remote App nnPerforming operations by RC on this unit without visual contact Marantz Blu-ray disc player of newer generation also can be controlled via a network receiver unit using the Marantz Remote App. Please ensure REMOTE CONTROL system of the receiver unit and the BD-Player is set up as shown in the previous section.
HDMI control function Setup (vpage 23) Playback (Basic operation) (vpage 30) nn HDMI control function (vpage 83) nn Sleep timer function (vpage 84) nn Web control function (vpage 85) nn Dual backup memory function (vpage 86) nn Panel lock function (vpage 87) nn Remote lock function (vpage 88) nn Various memory functions (vpage 88) nnOperations possible by HDMI control To use this unit to play the audio of a TV that does not support the ARC function, connect the TV to this unit with an optical-digital or
HDMI control function Press SLEEP and display the time you want to set. The SLEEP indicator on the display lights. Basic instructions If the HDMI control function does not operate properly, check the following points.
For example, if the IP address of this unit is “192.168.0.2”, enter “http://192.168.0.2”. File Edit View Favorites Tools Help INDEX 1 the IP address of this unit with “Information” 2 Check (vpage 111). Switch the “IP Control” setting to “Always On” (vpage 111). Web Controller Marantz NR1504 r t ZONE CONTROL NETWORK iPod/USB Tuner q http://192.168.0.2 40.
Web control function Video Video/HDMI Setup HDMI Setup On Screen Display TV Format Q6 Auto Lip Sync On Off HDMI Audio Out AVR TV HDMI Pass Through On Off HDMI Control On Off Pass Through Source Last Dual backup memory function The unit stores settings information in nonvolatile memory even when the main power supply is turned off. Using the Dual Backup Memory function, you can write settings information to another memory area to back up saved settings for recovery anytime as needed.
X ON/STANDBY PRESET CH STATUS VOLUME nnCanceling the Panel lock function X while you press and hold M-DAX and 1 Press DISPLAY with the unit in standby mode. PRESET CH – or PRESET CH + to select “FP 2 Press LOCK zOff”. Basic instructions Panel lock function To prevent accidental operation of this unit, you can disable operation of the buttons on the front panel. (z The currently set mode.) The Panel lock function is canceled.
X ON/STANDBY PRESET CH STATUS Various memory functions nnEnabling the remote sensor function the main unit is in standby mode, press X 1 When while holding down M-DAX and DISPLAY on the main unit. (z The currently set mode.) 3 Press STATUS to enter the setting. The infrared light receiving function on the main unit is enabled. M-DAX DISPLAY PRESET CH nnDisabling the sensor function of the remote control unit main unit. PRESET CH – or PRESET CH + to select “RC 2 Press LOCK On”.
Basic instructions How to make detailed settings Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. Setting items Detailed items Subwoofer Level Audio Surr.Parameter Tone M-DAX Audio Delay Volume Manual EQ HDMI Setup On Screen Disp.
Basic instructions Examples of menu screen displays Typical examples are described below. GExample 1H Menu selection screen (Top menu) GExample 2H Audyssey® Setup screen (with illustration) t Setup Menu Audio w Inputs Speakers y e Network General Setup Assistant u Start i q List of GUI menu setup icons w Currently selected setup item e List of GUI menu setup items NOTE When the menu is operated on a computer’s resolution (e.g.
Menu display Top menu display Front display Description q Press SETUP to display the menu screen. w TV screen: Displays the selected line. Display: Displays the selected item. • Use ui to move to the item you want to set. Setup Menu w Audio Video Inputs Audio Speakers w Network q TV screen: Displays the selected line. Display: Displays the selected item. • Use ui to move to the item you want to set. w Press ENTER to set to the mode in which the setting can be made.
Keyboard screen nnInput method the screen for inputting 1 Display characters (vpage 89 “Menu Select a character on the TV screen to input characters. GExampleH Source Rename screen Source Rename MEDIA PLAYER w u i Clear r MEDIA PLAYER Insert Delete A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! “ # $ % & ‘ ( ) z+ , ; < = > a/A Space o Cancel Q0 Q1 y a character to be changed. 2 Select q Use uio p to select or .
Make audio-related settings. Items that can be set with the “Audio” procedure Menu operation Dialog Level (vpage 94) Subwoofer Level (vpage 94) The menu is displayed on the TV screen. Surr.Parameter (vpage 94) Tone (vpage 95) M-DAX (vpage 96) • To return to the previous item, press o or BACK. • Exiting the Menu, press SETUP while the menu is displayed. The menu display disappears. Audio Delay (vpage 96) Volume (vpage 96) Advanced instructions 1 2 Use ui to select the menu to be set or operated.
Audio Surr.Parameter Default settings are underlined. Sets the output level to clarify the dialogue output from the center channel. Setting items Level You can adjust the surround audio sound field effects to match your preferences. The items (parameters) that can be adjusted depend on the signal being input and the currently set sound mode. For details on the adjustable parameters, see “Sound modes and surround parameters” (vpage 126).
Audio Tone 0.0 – 1.0 (0.3) Default settings are underlined. Adjust the tonal quality of the sound. The smaller the value, the more dialogue is concentrated on the center channel. The larger the value, the more dialogue is distributed to front left and right channels, and the more the sound image widens in the front. Setting items Tone Control On : Allow tone adjustment (bass, treble). Set the tone control function Off : Playback without tone adjustment. to “On” and “Off”.
Audio Audio Delay Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The “M-DAX” function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also restores the original bass characteristics for a rich and expanded tonal range.
Audio Setting items Default settings are underlined. NOTE • If you have not performed Audyssey® Setup, or if you change the speaker settings after performing Audyssey® Setup, you may not be able to select Dynamic EQ/Dynamic Volume. In this case, either perform Audyssey® Setup over again or perform “Restore...” (vpage 29) to return to the settings after Audyssey® Setup was run. • When HD Audio for which the sampling frequency exceeds 96 kHz is played back, the “Audyssey” cannot be set.
Audio Basic instructions Manual EQ Default settings are underlined. Use the 9 band graphic equalizer to adjust the tone of each speaker. “Manual EQ” can be set when “MultEQ®” setting (vpage 97) is “Manual EQ”. Setting items Curve Copy Copy “Audyssey Flat” (vpage 97) curve from MultEQ®. q Select the speaker. • Select the speakers you want to adjust when “Left/Right” or “Each” is selected. w Select the adjustment frequency band.
Make video-related settings. Items that can be set with the “Video” procedure Menu operation HDMI Setup (vpage 100) 1 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. Press SETUP. The menu is displayed on the TV screen. Basic instructions Video On Screen Disp. (vpage 101) • To return to the previous item, press o or BACK. • Exiting the Menu, press SETUP while the menu is displayed. The menu display disappears.
Video Default settings are underlined. Make settings for HDMI video/audio output. Setting items Setting details On : Compensated. Off : Not compensated. AVR : Play back through speakers connected to the unit. TV : Play back through TV connected to the unit. Setting details HDMI Control On : Use HDMI control function. You can link operations with Off : Do not use HDMI control function.
Video Default settings are underlined. Select the on-screen display user interface preferences. Setting items Volume Sets where to display the master volume level. TV Format Set the video signal format to be output for the TV you are using. Setting details Setting items Format Bottom : Display at the bottom. Top : Display at the top. Off : Turn display off. Info Displays status of operation temporarily when the sound mode is changed, or input source is switched.
Perform settings related to input source playback. • You do not have to change the settings to use the unit. Make settings when needed. Items that can be set with the “Inputs” procedure Menu operation Input Assign (vpage 103) Source Rename (vpage 105) The menu is displayed on the TV screen. Hide Sources (vpage 105) Source Level (vpage 105) Input Select (vpage 105) • To return to the previous item, press o or BACK. • Exiting the Menu, press SETUP while the menu is displayed.
Inputs Setting items This unit has certain input sources such as “CBL/SAT” assigned to audio and video connectors by default. By making the default connections, you can simply press an input source select button to play back audio or video from the connected device with ease. When making connections other than the default settings, you must change settings in this section.
Inputs Setting details DIGITAL Set this to change the digital audio input connectors assigned to the input sources. Coax (Coaxial) / Opt (Optical) : Assign a digital input connector to the selected input source. – : Do not assign a digital input connector to the selected input source. CBL/SAT • At time of purchase, the settings of the different input sources are as shown below.
Inputs Source Level Change the display name of the selected input source. This is convenient when the input source name of your device and the input source name of this unit are different. You can change the name to suit your needs. When the renaming is completed, the name is displayed on this unit’s display and on the menu screen. • This function corrects the playback level of the selected input source’s audio input.
Set when changing Audyssey® Setup settings. • If you change the speaker settings after performing Audyssey® Setup, it will not be possible to set Audyssey MultEQ®, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (vpage 97). • Can be used without changing the settings. Please set if necessary. Items that can be set with the “Speakers” procedure Menu operation Audyssey® Setup (vpage 23) Basic instructions Speakers Manual Setup (vpage 107) 1 2 Use ui to select the menu to be set or operated.
Speakers Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey® Setup. • If you change the speaker settings after performing Audyssey® Setup, it will not be possible to select Audyssey MultEQ®, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (vpage 97). • “Manual Setup” can be used without changing the settings. Please set if necessary. Setting items NOTE Front : Set the front speaker size.
Speakers Setting details Levels Test Tone Start : Output test tone. Set the volume of the test • Front L / Center / Front R / Surround R / Surround L / Subwoofer : A tone to be the same when it test tone is output from the selected speaker. While listening to the test is output from each speaker. tone, adjust the volume output from the selected speaker. • –12.0dB – +12.0dB (0.0dB) : Adjust the volume.
Speakers Bass Set subwoofer and LFE signal range playback. Setting details Subwoofer Mode : Select low range signals to be reproduced by subwoofer. • LFE : The low range signal of the channel set to “Small” speaker size is added to the LFE signal output from the subwoofer. • LFE+Main : The low range signal of all channels is added to the LFE signal output from the subwoofer. This is usually the best setting for most systems. NOTE DVD 109 Information If “Front” and “Center” for “Speaker Config.
To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network (LAN). If you assign an IP address for each device, you must use the “IP Address” setting to assign an IP address to this unit and enter the information about your home network (LAN) such as the gateway address and subnet mask.
Network Friendly Name Display network information. The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your preferences. Setting details Setting items Friendly Name / DHCP On or Off / IP Address / MAC Address Edit Name Edits Friendly Name. MAC Address is required to make a vTuner account. Default settings are underlined. Enables network communication in standby power mode.
Network Setting details Make settings for wired LAN. Only set “Settings” when connecting to a network without a DHCP function. Setting details w q r u DHCP -IP Address -Subnet Mask -Default Gateway -Primary DNS -Secondary DNS Proxy -Name -Port Save Cancel o Q0 Off 192. 168. 000. 001 255. 255. 255. 000 000. 000. 000. 000 000. 000. 000. 000 000. 000. 000.
Network Basic instructions Diagnostics Used to check the network connection. Setting items Setting details OK : Connected. Error : The LAN cable is not connected. Check the connection. OK : Accessed. Error : Failed to communicate with the router. Check the router settings. Advanced instructions Physical Connection Checks the physical LAN port connection. Router Access Checks the connection from this unit to the router. Internet Access Checks whether this unit has access to the Internet (WAN).
Make various other settings. Menu operation Items that can be set with the “General” procedure Language (vpage 115) 1 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. Press SETUP. The menu is displayed on the TV screen. Basic instructions General Auto Standby (vpage 115) Information (vpage 116) • To return to the previous item, press o or BACK. • Exiting the Menu, press SETUP while the menu is displayed. The menu display disappears.
General Default settings are underlined. Set the language for display on the menu screen. Front Display Default settings are underlined. Makes settings related to the display on this unit. Setting details Setting items Display English / Français / Español Buttons on the main unit can be used for operations. Each time DISPLAY is pressed, the setting is changed as shown below. On Auto Off Off NOTE Auto Standby Default settings are underlined.
General Press INFO to display current source name, volume, sound mode name, and other information at the bottom of the screen. Show information about receiver settings, input signals, etc. Items Audio Show information about audio input signals. Setting details Examples of screen display • Status display screen When the input source is switched.
General Setting items To help us improve our products and customer service, Marantz collects anonymous information about how you use your AV receiver (such as frequently used input sources and sound modes and speaker settings). Marantz will never provide any information we collect to third parties. Setting details Yes : Provide Marantz with information about how you use this unit via the network. No : Do not provide Marantz with information about how you use this unit via the network.
General Add New Feature Display new features that can be downloaded to this unit and perform an upgrade. NOTE Upgrade Package : Display the items to be upgraded. Upgrade Status : Display a list of the additional functions provided by the upgrade. Upgrade Start : Execute the upgrade process. When the upgrade starts, the power indicator becomes red and the menu screen is shut down. During the upgrade, the amount of upgrade time which has elapsed is displayed.
Information Here we list other information related to this unit. Please refer to this information as needed.
Basic instructions Part names and functions Front panel For buttons not explained here, see the page indicated in parentheses ( ).
Q0 o i u y t q Information display The input source name, sound mode, setting values and other information are displayed here. w Input signal indicators e MUTE indicator This lights when the audio mute mode is selected (vpage 31). r Master volume indicator t Circle indicator DVD This lights when the sleep mode is selected (vpage 84). u Tuner reception mode indicators These light according to the reception conditions when the input source is set to “TUNER”.
Basic instructions Rear panel See the page indicated in parentheses ( ).
Q0 Q1 q • MOVIE button • MUSIC button • GAME button • PURE button r Information button (INFO)····················································· (116) t Cursor buttons (uio p)········································ (91, 93, 99, 102, 106, 110, 114) w Q3 y ENTER button······························· (91, 93, 99, 102, 106, 110, 114) u BACK button··············································· (36, 48, 52, 55, 61, 64) i FAVORITE STATION buttons (1 – 3)······································· (67) o Syst
Remote control unit Operating range of the remote control unit q Remove the rear lid in the direction of the arrow and remove it. Point the remote control unit at the remote sensor when operating it. w Load the two batteries properly as indicated by the marks in the battery compartment. R03/AAA Basic instructions Inserting the batteries Approx. 23 ft/7 m e Put the rear cover back on. 30° NOTE NOTE DVD 124 Information • Insert the specified batteries in the remote control unit.
Trademark information Manufactured under license from Audyssey Laboratories™. U.S. and foreign patents pending. Audyssey MultEQ®, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® are registered trademarks of Audyssey Laboratories. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.
Basic instructions Surround This unit is equipped with a sophisticated digital signal processing circuit that lets you play your favorite movie and music sources and listen to them with a wide range of surround sound mode choices. Sound modes and surround parameters This table shows the speakers that can be used in each sound mode and the surround parameters adjustable in each sound mode. Symbols in the table S This indicates the audio output channels or surround parameters that can be set.
Surround Sound Mode (vpage 72) Panorama (vpage 95) Dimension (vpage 95) NEO:6 Music mode only Center Width (vpage 95) Center Image (vpage 95) Tone z6 (vpage 95) Audyssey (vpage 97) MultEQ® z7 (vpage 97) Dynamic EQ z8 (vpage 97) Dynamic Volume z8 (vpage 97) M-DAX z9 (vpage 96) DIRECT/PURE DIRECT (2-channel)z1 DIRECT/PURE DIRECT (Multi-channel)z1 STEREO S S S S MULTI CH IN S S S S S S S S S DOLBY DIGITAL S S S S DOLBY DIGITAL Plus S S S S DOLBY TrueHD S S S S S S S
Surround Basic instructions nnTypes of input signals, and corresponding sound modes This table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode. Symbols in the table F This indicates the default sound mode. S This indicates the selectable sound mode.
Output Input HDMI VIDEO A A A S S A S S Video Video output Menu A Only the menu is displayed S S (HDMI) Video Menu A S
A D Deep Color An imaging technology supported by HDMI. Unlike RGB, which uses 8 bits (256 shades) per color, it can use 10 bits (1024 shades), 12 bits (4096 shades), or 16 bits (65536 shades) to produce colors in higher definition. Both devices linked via HDMI must support Deep Color. DLNA DLNA and DLNA CERTIFIED are trademarks and/ or service marks of Digital Living Network Alliance. Some contents may not be compatible with other DLNA CERTIFIED® products.
Explanation of terms Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Josh Coalson L LFE This is an abbreviation of Low Frequency Effect, which is an output channel that emphasizes low frequency effect sound. Surround audio is intensified by outputting 20 Hz to 120 Hz deep bass to the system subwoofer(s). M MAIN ZONE The room where this unit is placed is called the MAIN ZONE .
If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase. GHDMIH Symptom Symptom Cause/Solution Page Power does not turn on.
GAudioH Audio is not output. Cause/Solution Symptom Page The volume does not • The maximum volume is set too low. Set the maximum volume increase. using “Limit”on the menu. • Power for external devices connected to the output connectors of the unit may not be turned on. Check the power of connected external devices. 96 Dolby PLg mode or DTS NEO:6 mode cannot be selected. • Check that “Speaker Config.” – “Center” or “Surround” is set to other than “None”. If the speaker system is 2.0/2.
GiPod / USB memory device / Internet Radio / Media Server / Flickr / Pandora / SiriusXM / SpotifyH iPod cannot be played. • Some iPods do not support being used connected directly to the USB port. 17 The file names are not displayed properly (“...”, etc.). • Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that cannot be displayed are replaced with a “.” (period). • Invalid tags are used for files within the USB memory device connected to this unit.
Symptom Page • Network or USB memory device’s signal transfer speed is slow or communications lines or radio station is congested. This is not a malfunction. When playing broadcast data with a high bit rate, the sound may be broken, depending on the communications conditions. – Sound quality is poor • File being played has a low bit rate. This is not a malfunction. or noise is heard during play. • Login information is incorrect. Check if the “Email address” for Pandora has been properly entered.
Specifications nn Audio section • Power amplifier Rated output: M-DAX X 1 2 Press X while simultaneously pressing M-DAX and PRESET CH –. the display starts flashing at intervals of about 1 second, release the two 3 Once buttons. Output connectors: • Analog Input sensitivity/Input impedance: Frequency response: S/N: Turn off the power using X.
Index vvA vvC Cable Audio cable······················································· 12 Coaxial digital cable·········································· 12 HDMI cable··················································· 9, 10 LAN cable························································· 12 Optical cable····················································· 12 Speaker cable··················································· 80 Subwoofer cable··············································· 80 Video cable
vvN vvR vvO On Screen Disp.
License nn Boost http://www.boost.org/ Boost Software License - Version 1.0 - August 17th, 2003 The copyright notices in the Software and this entire statement, including the above license grant, this restriction and the following disclaimer, must be included in all copies of the Software, in whole or in part, and all derivative works of the Software, unless such copies or derivative works are solely in the form of machine-executable object code generated by a source language processor.
Copyright (c) 2002, Xiph.org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: • Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
nn zlib http://www.zlib.net/ zlib.h -- interface of the ‘zlib’ general purpose compression library version 1.2.3, July 18th, 2005 Copyright (C) 1995-2004 Jean-loup Gailly and Mark Adler COPYRIGHT AND PERMISSION NOTICE About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies.
1 31/32 (50.0) 13 25/64 (340.0) Weight : 18 lbs 1 oz (8.2 kg) DVD 1 31/32 (50.0) 4 9/64 (105.0) 3 9/16 (90.5) 5/8 (16.0) 2 3/16 (55.5) Information 17 21/64 (440.0) 8 55/64 (225.0) 14 29/64 (367.0) 12 15/16 (328.5) Advanced instructions 2 11/64 (55.0) 37/64 (14.5) 1 57/64 (48.0) 57/64 (22.5) Unit : in.
V00 D&M Holdings Inc.