User Guide

ManualsBrandsLOFFLER ManualsOtherLOFFLER Konica Minolta iSeries Print from Mac

QUICK GUIDE

MN – Bloomington: 952.925.6800 • Mankato: 507.625.8040 • Rochester: 507.292.8888 • St Cloud: 320.255.8888 • Willmar: 320.905.0289

WI – Eau Claire: 715.834.2679 • Hudson: 715.834.2679 • La Crosse: 608.782.7587

7/9/2019

Konica Minolta iSeries – Print from Mac

Description of print settings for Apple computers.

Basic Print Screen:

This is the “header” section seen when choosing file

→

print on any document. This shows the same for

any application or software.

1. Printer: Select which machine to print to.

2. Presets: Shortcuts to turn on multiple settings at same time.

a. First select the desired options (ex: 2 sided, staple, grayscale).

b. In the drop down select the option to “save current setting as preset (this will give the option to

name the preset).

c. If the preset is the desired default setting, hold Control key and click on the Print button.

3. Copies: The number of sets to be printed.

4. Pages:

• All – prints the entire document.

• From – Gives the option to print singular pages or a page range.

5. Drop-down: This menu is sectioned off in 3 parts, divided by the grey line.

• Section 1: Gives the options from the software applications.

• Section 2: Gives all the “print driver” options from the actual machine. Descriptions will be

covered in next section. (Output Method, Layout / Finish, Paper Tray / Output Tray, Cover Mode,

Per Page Setting, Stamp / Composition, Quality.)

• Section 3: Supply levels of machine.

Summary of content (8 pages)

PAGE 1
QUICK GUIDE Konica Minolta iSeries – Print from Mac Description of print settings for Apple computers. Basic Print Screen: This is the “header” section seen when choosing file → print on any document. This shows the same for any application or software. 1. Printer: Select which machine to print to. 2. Presets: Shortcuts to turn on multiple settings at same time. a. First select the desired options (ex: 2 sided, staple, grayscale). b.
PAGE 2
QUICK GUIDE Output Method: Choosing the method by which the document will print out. 1. Collate: Keeps documents sorted as a set. Ex: 3-page document prints 1-2-3, 1-2-3, 1-2-3. If collate is un-checked, document will print out 1-1-1, 2-2-2, 3-3-3. 2. Offset: For each document set printed, it will lay in the tray a little to the left or right of the last set, for ease of separating. 3. Output Method: Confidential and other options. • Print: Directly prints out from machine.
PAGE 3
QUICK GUIDE Layout / Finish 1-sided or 2-sided and how it is stapled, bound, or punched if optional equipment is available. Layout Tab: 1. Print Type: The option to choose single, double, or booklet prints. • 1-Sided: Prints on only one side of paper. • 2-Sided: Prints on both sides of paper. • Booklet: Changes layout so document can be folded in half. 2. Binding Position: Where the page turns. • Left Bind: Page turns like a book, left to right. • Right Bind: Page turns opposite of a book, right to left.
PAGE 4
QUICK GUIDE Finish Tab: Check the boxes to the left of each option to turn on setting. 1. Staple: By checking this box, the document will default to staple in the top left corner of the page. 2. 3. 4. 5. There are also options to staple in the right corner, 2-position (2 staples on 1 side), and if the machine has the specific folding unit installed, it can also saddle-stitch the middle of the paper. Punch: This box turns on hole-punching.
PAGE 5
QUICK GUIDE Paper Tray / Output Tray: Ability to select paper trays and output trays. 1. Paper Tray: The option to choose the desired input tray (ex: bypass). 2. Paper Type: This option sends to the machine the paper thickness the document should be printed on. If the paper tray is left on auto, and a certain thickness is chosen, it will pull from the tray that has that particular paper specification.
PAGE 6
QUICK GUIDE Per Page Setting: Can choose paper from more than one tray. 1. Per Page Setting: This area allows a user to set the device to pull different pages/sections from different trays. Example: if a document had several chapters and the user wanted a colored sheet to begin each chapter, this could be set in this area. 2. Cover Mode: Allows user to choose a different tray for the front/back cover of a document. ©2018 Loffler Companies MN – Bloomington: 952.925.6800 • Mankato: 507.625.
PAGE 7
QUICK GUIDE Quality Basic/Application: 1. Select Color: Where the user can set the document to print in Auto Color, Black (Grayscale), or Full Color. • Auto Color makes print with color settings to suit the colors of the original. • Full Color makes print using all 4 colors to create blacks as well as color. • Black makes print in black even if the original is color. 2. Image Quality Setting: Where the user can “tell” the device what they are printing (ex: document, photo, web). 3.
PAGE 8
QUICK GUIDE Stamp/Composition: Options can be added to a document prior to printing. 1. Copy/Security: Option to add stamps (will print over the document) or watermarks (will be faint and the document can be read through them). 2. Date/Time: Option to add dates or times marks to a document. 3. Page Number: Option to add page numbers and choose font/size/location on page. 4. Header/Footer: Option to add information to the header or footer of a document upon printing.