Operation Manual

Art 40-55
User manual
57

Video
Wind
To search for desired scenes in movies you can fast forward and rewind
at three different speeds. Sound is not audible during winding.
 or  press a little bit longer.
By each brief pressing of  or  the speed will increase
until you switch back to the first speed.
The different winding speeds are represented by the
symbols shown below.
In case of time-shift viewing, playback is automatically
activated when the end of the recording is reached.
You are then about 10 seconds behind the live
picture or when rewinding at the beginning of the
time shift recording.
In case of Fast forward of archive entries, playback
will finish at the end of the recording. The DR+
archive is displayed again.
PLAY key: Continue playback.
In the case of Internet videos, please wait until these
are buffered in the memory. This can take a few
seconds, depending on the bit rate of the film and
Internet speed.
11:27
Digital 2
20.12.2014
0:00 0:40
hh:mm
Back
DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna
11:27
Digital 2
20.12.2014
0:00 0:43
hh:mm
Back
DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna
Repeat
Videos can be repeated, i.e., replayed in an endless loop. Depending
on the source (DR+ archive, USB storage medium, media server in
the network), single or all videos can be replayed in an endless loop.
Repeated playback of DR+ archive entries
INFO: Show status bar.
 Mark Repeat
,
OK confirm.
The current archive entry will be replayed repeatedly.
The repetition setting remains active for this archive
entry even when the playback is finished.
To deactivate playback again:
 Mark Repeat off
,
OK confirm.
Repeating videos from USB storage media or media servers
INFO: Show status bar.
 Mark Repeat title
,
OK Switch the repetition of the individual video ON/
OFF.
The repeat setting remains until it will be deacti-
vated or another video is replayed.
Or:
 Mark Repeat all
,
OK Switch repetition of all titles of the current
directory ON/OFF.
The repeat setting remains until it will be deactivated
or another directory in the overview is selected.
Repeat title and Repeat all cannot be activated
simultaneously. Using one of the two functions
deactivates the respective other one.