Installation Guide for the 4x4 Warranty Card and Customer Survey inside (for free Extended Warranty!) Visit our website for online tutorials and information © LiquidArt, LLC, 401 S. Redwood St., Canby, OR 97013 Phone: (800) 974-9586 • Fax: (503) 263-7699 www.liquidartfountains.
Parts List • 4’ x 4’ 70 gallon single, double or triple fountain reservoir • 700 gph, 950 gph, or 2100 gph water pump • Water flow control valve • Flexible hose(s) with appropriate fittings • Fountain rock(s) or pottery 1
Step-By-Step Installation Instructions Tools necessary for installation: Shovel, level, box knife or scissors and marker paint (optional). Step 1 – Choosing Your Fountain Base Location Choose a location for the 4’x4’ pondless reservoir and use the base (or marker paint, if available) to mark the ground. NOTE: When choosing a location for your fountain, select an area large enough to accommodate the base AND any possible water overspray.
Step 4 – PuMp/manifold connection Thread the manifold/valve assembly onto the threaded pump outlet. Turn until hand-tight (do not over-tighten). Then hand-press the pre-filter onto the water pump inlet. Single Fountain (LA5000) Double Fountain (LA6000) Triple Fountain (LA7000) Step 5 – POLYMESH SCREEN Pull the threaded ends of the hoses through the grating at the location desired for placement of the rocks.
Step-By-Step Installation Instructions STEP 7 – Water Flow Control Your rock or pottery fountain will come with a small insert located in the top. If installing one of our pottery or bowl rocks (featured) it is suggested to adjust up or down for desired water head height. Step 8 – Filling the Fountain Base/Water Flow Adjustments Fill the fountain base with clean water. Check and adjust the water level periodically, keeping the water level at or near the bottom of the grating.
products. There are many styles and colors available, and these can be found at any rock yard, as well as most major home improvement stores. Avoid placing soil or bark on top of the polymesh screen, because it may fall through the screen and into the water inside the reservoir. If you’d like to put flowers or decorative plants on top of your fountain base, we suggest using the LiquidArt matching rock accent planter (accessories page).
Accessories SAVE TIME Automatically fills the reservoir to the proper water level, keeping you fountain full Auto-Fill Kit: The Liquid Art Autofill system is designed to attach to the 4’x4’ reservoir via a water source, hose or in-line. It can be added at any time during or after installation to keep proper water levels.
LED Light Kit: LED lights are energy efficient and last 10 times longer than conventional lighting. These three lights are equipped with super bright LEDs, high quality waterproof housing, and a 23 foot cord. They are great for fountains and garden landscapes as they can be used in and out of water. Part Number: LA3000 “Foothills” Accent Rock: The Foothills Accent rock is constructed with the same reinforced concrete to match your Liquid Art bubblers.
fountain care Caring for Your LiquidArt Rocks—Tips to Keep Your Bubblers Looking Great! LiquidArt’s Glass-Fiber-Reinforced-Concrete (GFRC) bubblers are designed to provide years of enjoyment, with minimal care or maintenance required. Because they are made of concrete, they are very rugged and will withstand the elements without the color fade or discoloration common in inferior faux stones. Cleaning—Dirt Spots LiquidArt’s GFRC rocks will age in a very similar manner as natural stones.
Note: Due to overspray and evaporation, clean water must be added periodically. Failing to do so could cause the water pump to run dry, resulting in a damaged pump. Damage to the water pump due to an inadequate water level in the fountain base will void the limited warranty. Periodically inspect the grating and polymesh screen for damage. Replace if necessary.
WARRANTY LiquidArt Rock and Pondless Fountain Thank you for purchasing a LiquidArt product, we hope you enjoy it for years to come. At LiquidArt we have a very simple philosophy as to how we treat you, our customer. We want you to be 100% happy with your product and with our service. This warranty covers the product you purchased from LiquidArt, LLC for a period of one (1) year as follows. If you have a warranty question or claim, please do not contact the place of purchase.
Contact Information Corporate Name: LiquidArt, LLC Phone Number: (800) 974-9586 Fax Number: (503) 263-7699 Email: info@liquidartfountains.com Address: 401 S. Redwood St. Canby, OR 97013 Free Extended Warranty In exchange for information, LiquidArt will extend this product warranty from 1 year (3 years on the water pump) to 5 years (including water pump).
Mail Customer Satisfaction Survey and Warranty Registration to: LiquidArt, LLC, 401 S. Redwood St.
Customer Satisfaction Survey and Warranty Registration After first seeing this product, how long before you actually made your purchase? Please tell us the store and location where your purchase was made.
