Network Router User Manual

EtherFast Cable/DSL Routers

7. Windows will notify you that it has completed copying the driver files to

your PC. Click the Finish button.

8. Windows will ask you if you want to restart your PC. Click the Yes button

so your new installation will take effect.

If it does not ask you, click the Start button, select Shut Down, then select

Restart and click the Ye s button.

Your USB installation is now complete.

Go to the Configuring Your Network with the

Cable/DSL Router section to configure your

network to work with the Router.

Instant Broadband Series

5. A new window will appear, saying that Windows is now ready to install

the best driver for this device. Click the Next button to continue.

6. Windows will begin copying the files to your PC. Do not click the Cancel

button or press the Esc key during this process.

If Windows asks for your Windows operating system files before copying,

direct your PC to the location of those files, e.g,

c:\windows\options\cabs, or D:\Win98 (assuming that your

CD-ROM drive is named D).