LG-RD5330 User Guide CDMA PHONE
Contents Introduction Highlights Important Information Check Accessories Before You Start FCC RF EXPOSURE INFORMATION Chapter 1. Getting Started Cautions Phone Overview On screen Icons Chapter 2. Basic Functions Turning the Phone On and Off Making a Call Correcting Dialing Mistakes Receiving Calls Emergency Dialing Speed Dialing Phone Book Features Chapter 3. Menu Features General Guidelines to MENU Access and Settings Names Messages Call History Profiles Setting Planner System Chapter 4.
RF Exposure Information WARNING! Read this information before operating the phone. In August 1996, the Federal Communications (FCC) of the United States, with its action in Report and Order FCC 96-326, adopted an updated safety standard for human exposure to radio frequency(RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
Phone Overview Function Lamp LCD screen END/PWR SEND Mouse Key Alphanumeric Keypad Soft Keys OK Key Star/Pound Key Clear Key Key Descriptions The light goes on when you use the power key to turn on the phone and when there are incoming calls and messages. Displays messages & indicator icons. Used to turn power on/off. This key disconnects a call. Using this key, you can also exit out of a menu back to the phone’s standby display without changing the setting. Allows user to place or answer calls.
D Chapter 2. Basic Functions Turning the Phone On and Off Turning the Phone On 1. Install a charged battery pack or connect the phone to an external power source such as the cigarette lighter adapter or car kit. 2. Press [END/PWR] for a few seconds until the red light on the top of the phone flashes. Fully extend the antenna for the best performance. Like any other radio device, avoid any unnecessary contact with the antenna while your phone is on. Turning the Phone Off 1.
incoming call. Your phone may also display the incoming caller’s identification. Dialing a call from Phone Book You can place a call from any memory location either by speed dialing or by pressing [SEND] while looking up the memory location. One-Touch Dialing : One-touch dialing is a convenient feature which enables you to dial frequently used numbers in your speed-dial data by pressing a key . Entry 9 is designated to Emergency Call.
Call History ([Menu]+[3]) Allows you to view the 30 most recently dialed phone numbers. Once you exceed the 30-number storage limit, the oldest call history record is overwritten. These calls are divided into 4 types of calls Missed ([Menu]+[3]+ [1]) Allows you to view list of all incoming calls and you may place a call by pressing [Send]. Received ([Menu]+[3]+ [2]) Allows you to view list of all incoming calls and you may place a call by pressing [Send].
(5) Message Alert – Alert Type : Select one out of 4 alert types(Vibrate, Lamp,2beeps,4beeps) - Repeated alert : Select one out of 2 repeate option(yes or no) (6) Keypad Volume - Adjust the volume of the keypad using the [34] key 3.Rename – Change title of this menu to user define. Loud ( [Menu] +[4]+[4] ) This menu is the same with General Menu Headset ( [Menu]+[4]+[5] ) 1. Call Alert Types 2. Ring Tone 3. Ring Volume 4. Speaker Volume 5. Message Alert 6.
backlight is turned off 10 seconds after the last key is pushed. the backlight is turned off 30 seconds after the last key is pushed. “On when Cellcase open” means that the backlight is always on while Cellcase is open. “Always on” means that the backlight is on regardless of the Status of Cellcase. Choosing “Always on” significantly decreases talk time. “Always off” means that the backlight is never on. 8. Contrast ( [Menu]+[5]+[8] ) Allows you to set up LCD display contrast with [34] key. 9.
When this menu option is active, phone remove noise of environment. 7. Call timer ( [Menu]+[6]+[2]+[7] ) When this menu option is inactive, LCD will not display call timer in call mode. 8. Call Connect Alert ( [Menu]+[6]+[2]+[8] ) When this menu selected option ON and some times later phone connected call, that time phone beep the alert sound. 9. help ( [Menu]+[6]+[2]+[9] ) Display help about Call menu Phone ( [Menu]+ [6]+[3] ) 1.
4. Change lock code ( [Menu]+[6]+[4]+[4] ) New Lock Code allows you to enter a new four-digit lock code number. For confirmation, it will ask you to enter the new lock code twice. This is the same number as the pin code. 5. Reset Default ( [Menu]+[6]+[4]+[5] ) Initialize all information saved in the phone. 6. Help ( [Menu]+[6]+[4]+[6] ) Display help about Security Menu.
3. Enter the name you want to find. 4. You can go another find menu using Soft Key 1 [Option] 5. In Find number, Enter the number you want to find. 6. In Find Group, You can select group with [v] key. 7. Groups ([Menu]+[1]+[3]) In this menu, you can view group members, and set ring tone, edit group’s title. 1. Press Soft Key 1 [Menu] 2. Press [3] 3. Select group you wand with [v] key. 4. Press Soft Key 1 [Option]. 5. You can go sub menu(view members, set ring tones, edit title) 6.
This service supports reception of the text message, alerting, and the voice mailbox. It is possible to access the above functions with the text message key . It is possible to store up to total 31(new+old+voice) messages. It is recommended to check the number of character receivable because the capacity depends on the system service provider. - Write : Menu to send message.
• • Erase : erase received msg Reply : send msg to #CB 3. Outbox ([5]+[3]) A. Press [Select] B. Press [Option] C. Select [View] • View : view sent msg • Erase : erase sent msg • Forward : send msg to another phone number 4. Voice Mail ([5]+[4]) 1) 2) Press [Select] Press [Option] 3) Select [Listen] • • Listen : listen voice mail Erase : erase received voice mail 5.
3) 4) 5) Select [View] • View : view template • Erase : erase template • Add : Add template Add string From this state the same with Write Message 8. SMS Groups ([5]+[8]) 1) Press [Select] 2) Press [Add] 3) Select Phonebook entry in phonebooke find menu. 4) Press [Send] 5) From this state the same with Write Message. 9. Sent Counts ([5]+[9]) 1) Press [Select] 2) Showing the All Message. 10.
####->[6. SMS MO] Select 1. SO : Select 8K or 13K 2. L3ACK : Select ON/OFF Chapter 6. Functions used during a call Scratch pad(During a call : [MENU]+[1] ) You can save memo during a call and this data is saved at call history Mute / Unmute (During a call : [MENU]+[2] ) Sometimes it is necessary to mute a call so that caller does not hear you or certain background noise. To use this function during a call, Press Soft Key 1 [Menu] and [1].
Headset Connects to your phone, allowing hands free operation. Includes earpiece, microphone and mute key. (Model Headset 1000) Hand strap AC Adaptor Appendix 1. Installation 1 Installing a Battery Pack 1) The Battery pack is keyed so it can only fit one way. Align the groove in the battery pack with the rail on the back of the phone until the battery pack rests flush with the back of the phone. 2) Insert the bottom of battery into the openning on the back of the phone.
2.4. Microphone Installation Install the microphone either by cliiping I onto the sunvisor (driver’s side) or by attaching it to door post (driver’s side), using a velcno adhesive tape (not included). 2.5 Cable Connections 2.5.1 Power and Ignition Cables Connect the red wire to the car battery positive terminal and the black wire to the car ground. Connect the green wire to the car ignition sensor terminal. ( In order to operate HFK please make sure to connect green wire to ignition sensor terminal.
Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 0.948 W/kg and when worn on the body, as described in this user guide, is 0.
