Specification

Technical Information
Fixture*:
Basin area 13″ (33 cm) x 12″ (30.5 cm)
Water depth 4-3/8″ (11.1 cm)
Drain hole 1-3/4″ (4.4 cm) D.
*Approximate measurements for comparison only.
Included components:
Cut-out template 115887-7
Installation Notes
Install this product according to the installation guide.
Product does not have overflow.
Spout must be a minimum of 5″ (12.7 cm) long for adequate
clearance into the lavatory when installed with the centerline
as shown.
Spout must be tall enough to clear the 3″ (7.6 cm) rim height
and provide a 1″ (2.5 cm) air gap per ASME A112.1.2.
Will comply with ADA when installed per Section 606
Lavatories of the Act.
Will comply with CSA B651 when installed per Clause 4.3.3
of the standard.
Will comply with OBC when installed per Clause 3.8.3.11.
Standard Installation
K-14225
Recommended ADA Installation
for Self-Rimming Only
9-3/4"
(24.8 cm)
27"
(68.6 cm)
Min
6-3/8"
(16.2 cm)
1/2"
(1.3 cm)
18" (45.7 cm)
9"
(22.9 cm)
9"
(22.9 cm)
9"
(22.9 cm)
Min
34"
(86.4 cm)
11"
(27.9 cm)
2"
(5.1 cm)
24" (61 cm)
9-3/4"
(24.8 cm)
8"
(20.3 cm)
8" (20.3 cm)
Min
16"
(40.6 cm)
L Of Fitting
C
L Of Fitting
C
ADA Drain Outlet
3"
(7.6 cm)
1-1/2"
(3.8 cm)
10-1/4"
(26 cm)
14"
(35.6 cm)
1-1/4" OD
3/8" Cold
3/8" Hot
4" (10.2 cm)
Product Diagram
IRON BELL
®
IRON BELL
®
VESSELS LAVATORY
Page2of2
115887-4-
DF