MSDS

Suitable extinguishing media: Carbon dioxide, foam, dry chemical powder.
Extinguishing media not to be used: Never use a direct water jet.
Exposure hazards from combustion products: In case of fire, carbon monoxide and other toxic
organic substances will be generated. Do not inhale fumes and smoke.
Personal protective equipments: Wear full protective clothing. Use self-contained breathing
apparatus.
6. Accidental release measures
Personal precautions: Notify safety personnel of large spills. Caustic potassium hydroxide may
be released from leaking or ruptured batteries. Avoid eye or skin contact and in halation of
vapors. Increase the ventilation. Wear protective clothing. Keep unprotected persons away.
Environmental precautions: Avoid discharge and penetration into sewerage systems, waterways,
pits, and cellars.
Methods for cleaning up: Collect spilled material with an insert standard absorbent like sand or
silica.
Care for well-ventilated conditions. Recycle or dispose of the materials in an appropriate way.
7. Handing and storage
General handling: Obey the common known rules and precautions for handling with chemicals.
Avoid mechanical and electrical abuse. Do not short battery or install incorrectly. Batteries may
explode, pyrolyze or went if disassembled. Crushed, recharged or exposed to high temperatures.
Install batteries according to equipment instructions. Do not mix battery systems, such as
alkaline and zinc-carbon.
Replace all batteries in equipment at the same time. Do not carry batteries loose in pocket or bag.
Do not remove battery labels.
Storage: Store product in well-filled, appropriate coated and tightly closed containers avoiding
influence of oxygen/air, light and humidity. Storage at room temperate.
8. Exposure controls and personal protection
Exposition/Technical measures: Atmospheric vapor concentrations must be minimized by
adequate ventilation.
Protection of hands, eyes and skin: None required under normal use conditions. When handling
leaking batteries, use neoprene, rubber or nitrile gloves and wear safety glasses to protect hands,
eyes and skin.
General safety and hygiene measures: use only as directed.
9. Physical and chemical properties
Physical state: Stainless steel top battery Colour: Contents dark and gray in colour
Odour: N.A.
Melting point: N.A.
Boiling point: N.A.
Flash point: N.A.
Explosion limit: Not available
Ignition temperature: Not available
Vapor pressure: Not available
Specific gravity: N.A.
Solubility in water: N.A.
Solubility in other solvents: N.A.
PH valve: Not available
Partition coefficient: Not available
Viscosity: Not available