Dimensions Guide

Faucet Hole Locations
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 50/60 HzHeated Surface:
Technical Information
All product dimensions are nominal.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
FreestandingInstallation:
EndDrain location:
This bath is designed for freestanding installation
only.
51-1/16" x 19-11/16" (1297 mm x 500 mm)Basin area, bottom:
58-9/16" x 25-5/16" (1487 mm x 643 mm)Basin area, top:
95 lbs (43.1 kg)Weight:
43.8 lbs/ft² (213.9 kg/m²)Minimum floor load:
15-1/16" (383 mm)Water depth:
65 gal (246.1 L)Water capacity:
Footprint, 1265461, not required, not
included
Template:
Heated Surface: 120 V, 1.1 A, 60 Hz, 65
W
Electrical component
rating:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
9-17-2017 02:55
Archer
®
Freestanding Bath
K-2594-W1