Dimensions Guide

1-1/2"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
Install this product according to the installation
instructions.
120 V, 15 AHeated Surface:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Technical Information
All product dimensions are nominal.
Drop-inInstallation:
This bath is designed for drop-in installation only.
It is not suited for use in a three wall alcove with
an overhead shower.
EndDrain location:
45-1/8" x 19-11/16" (1146 mm x 500 mm)Basin area, bottom:
52-3/4" x 25-5/16" (1340 mm x 643 mm)Basin area, top:
ADA compliant when installed to the specific
requirements of these regulations.
70 lbs (31.8 kg)Weight:
44 lbs/ft² (214.8 kg/m²)Minimum floor load:
15" (381 mm)Water depth:
58 gal (219.6 L)Water capacity:
Drop-in, 58-1/2" x 30-1/2" (1486 mm x
775 mm)
Cutout:
Heated Surface: 120 V, 0.5 A, 60 Hz, 65
W
Electrical component
rating:
2-3/16" (56 mm)Minimum flat for door:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-25-2018 01:58
Archer
®
5' Bath
K-1123-W1