ITEM #1130001 80 V LITHIUM-ION BRUSHLESS STRING TRIMMER MODEL #KST 2580-06 Español p. 20 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST, Monday - Friday.
TABLE OF CONTENTS 2 Package Contents................................................................................................................. 3 Hardware Contents............................................................................................................... 4 Symbols................................................................................................................................. 5 Safety Information........................................................................
PACKAGE CONTENTS A S PART A B C D E F G H J K L DESCRIPTION Battery Release Button Trigger Lock-off Lever Speed Switch Front/Auxiliary Handle Coupler Motor Housing Guard Upper Tube Lower Tube Spool Cover (preassembled to Spool Housing) QUANTITY 1 1 1 1 1 1 1 1 1 1 1 PART DESCRIPTION M Spool (preassembled to Spool Housing) N Eyelet (preassembled to Spool Housing) O Spool Housing (preassembled to Lower Tube） P Bump knob Q R S 3 Battery Charger String Head QUANTITY 1 1 1 1 1 1 1
HARDWARE CONTENTS (not shown actual size) AA Screw (preassembled to the Guard (H)) BB CC Fastening Knob Bolt Qty. 1 Qty. 1 Qty. 2 DD EE = 0.095” (2.4mm) Hex Wrench Bracket Qty. 1 Qty. 1 4 Cutting Line (13 ft) Qty.
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLS Save these Instructions The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING an imminently hazardous situation, which, if not avoided, will DANGER Indicates result in death or serious injury. a potentially hazardous situation, which, if not avoided, could WARNING Indicates result in death or serious injury.
SAFETY INFORMATION WARNING Read and understand all instructions before using this product. Failure to follow all instructions listed . • liquids, gases, or dust. Power tools create sparks that may ignite the dust or fumes. • Do not allow children or untrained individuals to use this unit. • Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. • Do not handle battery or tool with wet hands. • Never allow children to operate the equipment.
SAFETY INFORMATION • Do not charge battery in the rain, or damp or wet locations. Following this rule will reduce the risk of electric shock. • For household use only. • Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when personal injury. • Remove or disconnect battery before servicing, cleaning or removing material from the gardening appliance.
SAFETY INFORMATION Dress Properly – Do not wear loose clothing or jewelry. They can be caught in moving parts. Use of rubber gloves and substantial footwear is recommended when working outdoors. Wear protective hair covering to contain long hair. Use the Correct Appliance – Do not use appliance for any job except that for which it is intended.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: ASSEMBLY INSTRUCTIONS WARNING • Replace the battery or charger immediately if the battery case or charger cord is damaged. • Always make sure the string trimmer switch is OFF before inserting or removing the battery.
ASSEMBLY INSTRUCTIONS 2. Connect upper/lower trimmer tubes a. Push in the release button located on the lower tube (K). Align the release button with the positioning hole on the upper tube (J) and slide the two tubes together. Rotate the lower tube until the release button locks into the positioning hole. 2 F Release button J Positioning hole b. Tighten the screw with the hex wrench (DD).
ASSEMBLY INSTRUCTIONS 4. Cutting line on the trimmer. When the cutting line needs replacing, rewind new line onto existing spool. 4a L M CAUTION: To avoid injury, always remove the battery before installing the guard, changing a cutting line, or making any adjustments. O 4a. To remove the cutting line : a. Remove the battery from the trimmer. b. c. Turn the string trimmer over to access the spool.
ASSEMBLY INSTRUCTIONS 5. To install the cutting line Note: Do not put more than 15 feet of cutting line in at a time. a. 5a Line up the slots on the bump knob (P) with the slots on the spool cover (L). L P b. Insert line through the eyelet (N). Push line until it exits the opposite string head hole. c. Pull the line through until there is an equal amount of line on each side. d. Turn the bump knob (P) clockwise to begin winding the string into the string head (S).
ASSEMBLY INSTRUCTIONS 6. To replace the bump knob 6a a. Remove the battery pack. b. Turn the string trimmer over to access the spool. c. Remove the spool cover (L) by pressing on the two tabs parallel to each other on the sides of the spool cover (L). d. Remove the spool (M) from the spool housing (O). 6b Tab M LL M O e. While holding the bump knob , firmly pull it out. f. Replace with a new bump knob . Reinstall the spool and spool housing.
ASSEMBLY INSTRUCTIONS 7. Battery 7 IMPORTANT: The battery is not charged when it is purchased. Before using the trimmer for and charge. A Q 7a. To install: a. Align the battery (Q) with the cavity in the string trimmer housing. b. Insert the battery into the handle until the battery release button (A) locks into place. Push down on the battery until it locks into place. You should hear a “click” once it is installed. Note: The battery can only be installed one way. 7b. To remove: a.
OPERATING INSTRUCTIONS WARNING To avoid injury: • Do not squeeze the trigger while the string trimmer is inverted. • Do not carry the string trimmer with your finger on the switch. Avoid unintentional starting. 1. To turn on/off: a. Slide the speed switch (D) to the desired operating speed. Slide the speed switch to position 1 for low speed or position 2 for high speed. b. Press the lock-off lever (C). Squeeze the trigger (B) to start. 9 D c. Release the trigger (B) to stop.
OPERATING INSTRUCTIONS Trimmer tips Before each use: • Make sure the protective guard is tightly installed. If not, tighten the guard screws. • Before trimming, inspect the area for string, wire, branches or other material that may become entangled in the cutting line and thrown. Storage tips: • Do not store the grass trimmer/edger in sunlight, in an excessively warm place, or near a furnace. The battery life will be shortened. During use: • Trim only when the grass and weeds are dry.
CARE AND MAINTENANCE Trimmer Guard and Motor Maintenance Note: Before performing maintenance, remove battery from the tool. 1. Remove dirt and debris from guard using a paint brush (not included). 2. Clean dirt and debris off of motor cover and connection joints. 3. Clean line cutter blades by using a wire brush and spraying with an appropriate degreaser.
CARE AND MAINTENANCE 4. Inspect EXPS NQRE and line to ensure that there is an adequate amount of line and that no damage is present on the EXPS NQRE. TROUBLESHOOTING If you still have questions or an unresolved issue after going through this troubleshooting guide, or just want to speak to a Kobalt product expert, please call our customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST, Monday – Friday. PROBLEM Motor fails to start when switch trigger is depressed.
WARRANTY 5-YEAR LIMITED WARRANTY This Kobalt 80 V String Trimmer is warranted to the original purchaser from the original purchase date This Kobalt 80 V String Trimmer is warranted for the original user to be free from defects in material and workmanship. 8 warranty period, simply return the 80 V String Trimmer along with proof of purchase to the place of purchase for a free replacement or refund, or call 1-888-3KOBALT (1-888-356-2258) for warranty service.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST, Monday - Friday.
