Installation Instructions

- Drill
- Drill Bits
- 4'-8' Level
- Flat Head Screwdriver
- Phillips Head Screwdriver
- Chalk Line
- Tape Measure
- Marking Pencil
- Square
- Stud Finder
- Clamps
- Hacksaw
- Gloves
- Safety Glasses
- Miter Saw
- Pneumatic Nailer
- 1-1/4" 18-Gauge Brad Nails
Important Procedures & Measurements
For Your Installation ................................................... 2
Tools For Installation ................................................... 2
Preparation ................................................................ 3
Closet Uprights ....................................................... 3-5
Doors, Drawers, Closet Rods & More ........................... 5
Cover Panels, Moulding & Toe Kicks ............................. 6
Shelf & Drawer Location .............................................. 7
Drawer Locations ....................................................... 8
Hinge Locations ......................................................... 8
Note: You may also nd it helpful to have a table saw and circular saw for cutting down llers, cover panels, moulding and toe kicks.
BEFORE YOU BEGIN INSTALLATION
TABLE OF CONTENTS
TOOLS FOR INSTALLATION
IMPORTANT PROCEDURES FOR YOUR INSTALLATION
!
2
It is essential that you use the L-Brackets provided on
your design packet printout for your closet installation
(SKU 478-5050). These will be used to secure your
closet to the wall. Under no circumstances should nails
or drywall screws be used as fasteners as they do not
have the strength or holding power to secure to the wall.
VERIFYING YOUR ORDER
Verify that all hardware, shelves, closet uprights, fronts,
moulding and accessories you purchased are on site. A
missing item could delay the project.
ORGANIZING YOUR ORDER
Your KLËARVŪE CLOSETS
™
order may consist of closet
uprights, hinges, drawer kits, hardware, shelves, door and
drawer fronts, cover panels, and other finishing items.
While it can seem like a lot of pieces, we have some easy
tips and tricks to help you stay organized during your
installation process.
1
2
Your KLËARVŪE CLOSET
™
design packet (generated
from the ŪCRËATË
®
cabinetry planner) will list which
components are intended for each closet configuration
of your layout. Use the numbers on your floor plan and
elevation views with the numbers on the design list to
sort and pair your closets with their components.
You can organize each closet configuration by its SKU.
This is listed on the design list of the design packet,
along with the quantity needed. The SKU is labeled on
the outside of each product as well.
Installation instructions detailed in this manual are for
wood stud construction only. Attachment to any other
surface material such as metal stud, concrete block,
brick, stucco or poured concrete walls will require a
special fastener. Consult your local store
for recommended fasteners
Elevation View
Design List
Model: 5 W24"xD14"xH84.75"
2
2
1
4
4
2
SKU Each TotalDescription