Dimension Guide
PRODUCT MODEL NUMBERS
PRODUCT DIMENSIONS
Bottom Mount Refrigerator
KBFS20EC KBFS25EC
KBFS22EC KRFC300E
KRFF302E KRFF305E
Electrical: A 115-volt, 60-Hz, AC-only, 15- or
20-amp fused, grounded electrical supply is
required. It is recommended that a separate
circuit serving only your refrigerator be
provided. Use an outlet that cannot be turned
off by a switch. Do not use an extension
cord.
NOTE: Before performing any type of
installation, cleaning, or removing a light
bulb, turn the control (Thermostat, Refrig-
erator or Freezer Control depending on the
model) to OFF and then disconnect the
refrigerator from the electrical source. When
you are finished, reconnect the refrigerator
to the electrical source and reset the control
(Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired
setting. See “Using the Controls.”
Water: A cold water supply with water
pressure between 35 and 120 psi (241 and
827 kPa) is required to operate the ice maker
and water dispenser. If you have questions
about your water pressure, call a licensed,
qualified plumber.
IMPORTANT: The pressure of the water
coming out of a reverse osmosis system go-
ing to the water inlet valve of the refrigerator
needs to be between 35 and 120 psi (241
and 827 kPa).
Reverse Osmosis Water Supply: If a
reverse osmosis water filtration system is
connected to your cold water supply, the wa-
ter pressure to the reverse osmosis system
needs to be a minimum of 40 to 60 psi (276
to 414 kPa).
To ensure proper ventilation for your refrigerator, allow for a ¹⁄₂” (1.25 cm) space on each side and
at the top. Allow for 1” (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice
maker, make sure you leave some extra space at the back for the water line connections.
If you are installing your refrigerator next to a fixed wall, leave 2¹⁄₂" (6.3 cm) minimum on the hinge
side (some models require more) to allow for the door to swing open.
NOTE: This refrigerator is intended for use in a location where the temperature ranges from a
minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room temperature range for
optimum performance, which reduces electricity usage and provides superior cooling, is between
60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat
source
, such as an oven or radiator.
LOCATION REQUIREMENTS
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10635370B
3/15
2¹⁄₂" (6.3 cm)
¹⁄₂" (1.25 cm)
Model
Number/Size
Height - Overall
“A”
Height - Top
of Cabinet
“B”
Depth - Doors
Open 90°
“C”
Depth - Drawer
Open
“D”
Depth - With
Handles
“E”
Depth - Without
Handles
“F”
Depth - Cabinet
Only
“G”
Width - Cabinet
“H”
KBFS20EC
20.0 cu. ft.
70¹⁄₈"
(178.1 cm)
68¹⁄₂"
(174.0 cm)
43"
(109.2 cm)
44¹⁄₂"
(113 cm)
29³⁄₈"
(74.6 cm)
28"
(71.1 cm)
24¹⁄₈"
(61.3 cm)
35⁵⁄₈"
(90.5 cm)
KBFS22EC
(21.7 cu. ft.)
70¹⁄₈”
(178.1 cm)
68¹³⁄₁₆"
(174.8 cm)
47¹⁄₁₆"
(119.5 cm)
52¹⁄₁₆"
(132.2 cm)
34⁷⁄₁₆"
(87.5 cm)
31¹⁵⁄₁₆"
(81.1 cm)
28¹⁄₈"
(71.4 cm)
32⁵⁄₈"
(82.9 cm)
KBFS25EC
(24.8 cu. ft.)
70¹⁄₈”
(178.1 cm)
68¹³⁄₁₆"
(174.8 cm)
48¹⁄₁₆"
(122.1 cm)
53¹⁄₈"
(135 cm)
35⁷⁄₁₆"
(90 cm)
32¹⁵⁄₁₆"
(83.7 cm)
29¹⁄₈"
(74 cm)
35⁵⁄₈"
(90.5 cm)
KRFC300E
(20 cu. ft.)
70¹⁄₈”
(178.1 cm)
68⁷⁄₈"
(174.9 cm)
43¹⁄₈"
(109.5 cm)
48¹⁄₈"
(122.2 cm)
30¹⁄₂"
(77.5 cm)
28"
(71.1 cm)
24¹⁄₈"
(61.3 cm)
35³⁄₄"
(90.8 cm)
KRFF302E
(22.1 cu. ft.)
70¹⁄₈”
(178.1 cm)
68⁷⁄₈"
(174.9 cm)
47¹⁄₈"
(122.2 cm)
52¹⁄₈"
(134.9 cm)
34¹⁄₂"
(90.2 cm)
32"
(83.8 cm)
28¹⁄₈"
(74 cm)
32⁷⁄₈"
(83.5 cm)
KRFF305E
(25.2 cu. ft.)
70¹⁄₈”
(178.1 cm)
68⁷⁄₈"
(174.9 cm)
48¹⁄₈"
(122.2 cm)
53¹⁄₈"
(134.9 cm)
35¹⁄₂"
(90.2 cm)
33"
(83.8 cm)
29¹⁄₈"
(74 cm)
35⁷⁄₈"
(91.1 cm)
D
90˚90˚
C