User Manual

Number Part name Quanty
1 Pony head 1
2 Head Bolt (located in horse’s neck) 1
3 Pony body 1
4 Saddle horn (with phillips-head screw inserted) 1
5 Saddle horn cap 1
6 Apple 1
7 Carrot 1
8 Brush 1
9
Saddlebag
1
10
Baery Charger
1
Required Tools
4
To be performed by a supervising adult
Before every ride, it is important to carry out the following
safety checks. Do not ride a baery powered ride-on toy that is
not in proper working condion! Replace any worn or broken
parts as needed.
Steering and Control
The reins are ghtened and secured.
The reins are posioned so that the rider can easily
operate and steer the ride-on. There must be no diculty
for the rider in turning and/or operang the hand operated
push buon.
The reins are aligned so that the steering column and front
wheels are oriented in the same direcon.
Wheels
The wheels have no holes or are worn down in any one
area and that the tracon strips are intact and secured to
the wheels.
Ride-on
For all electrical components, make sure:
• The baery is fully charged
• The charging cord is NOT aached to the ride-on in
any way
• All connectors are securely snapped in place and will
not come detached while riding
• No wiring is exposed, worn, or detached in any way;
the motor is not hot to touch
• All electrical buons, including the power buon, hand
operated buon, and any buons for lights and
sounds, work properly
• If the ride-on’s electrical components show any sign
of damage or missing parts DO NOT RIDE unl the
condion is corrected
Make sure the ride-on is:
• Clean, dry, and in good condion
• All plasc pieces, including saddle, srrups, reins, and
wheels are securely aached
• There are no cracks or structural problems on the
ride-on toy
• If the ride-on toy shows any sign of damage or missing
parts DO NOT RIDE IT unl the condion is corrected
Make sure all safety labels are in place and readable,
and understood by the rider.
Parts Checklist
Pre-Ride Safety Checklist