COLOR TELEVISION USER'S GUIDE TV CATV VCR DVD For models: AV-24F704 AV-20F704 AV-14F704 POWER INPUT DISPLAY MUTING 3 2 1 SLEEP TIMER AUDIO SELECT 4 5 7 8 C.C.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
13. LIGHTNING To protect your unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
• As an “ENERGY STAR®” partner, JVC has determined that this product or product model meets the “ENERGY STAR®” guidelines for energy efficiency. ENER Y STAR IMPORTANT RECYCLING INFORMATION This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information, please contact your local authorities, or the Electronic Industries Alliance: http://www.
LOCATION OF CONTROLS FRONT Illustration of AV-24F704 BACK IN ANT(75 Ω) OUT VIDEO VIDEO L/MONO L/MONO AUDIO S-VIDEO AUDIO R POWER VIDEO 1 VIDEO 2 R PUSH 8 POWER 9 10 11 12 VIDEO 3 IN VIDEO ON TIMER CHANNEL 1 23 4 L/MONO AUDIO R VOLUME 5 6 7 HOW TO OPEN THE FRONT DOOR 1. POWER Button - Press to turn the TV on or off. 2. Remote Sensor - Signals from the Remote Control unit are received here. 3. ON TIMER Indicator - This indicator lights up when the powered up.
REMOTE CONTROL TV CATV VCR DVD POWER 12 1 2 INPUT 13 DISPLAY 3 4 SLEEP TIMER AUDIO SELECT 5 1 2 3 4 5 6 7 8 9 C.C. MUTING 6 0 RETURN 14 15 16 LIGHT 7 STANDARD ENTER 8 9 10 11 CH VOL VOL 18 CH EXIT MENU VCR CHANNEL PREV NEXT REW VCR /DVD POWER TV/VCR PLAY REC STOP OPEN/CLOSE FF PAUSE STILL/PAUSE RM-C 1256G TV BATTERY INSTALLATION 1. Open the battery compartment cover. 2. Install two “AA” batteries. 3. Replace the battery compartment cover. 6 17 19 1.
REMOTE CONTROL (CONTINUED) REMOTE CONTROL BASICS BATTERY PRECAUTIONS • Before you can operate the remote control, you must first install the batteries (included). See “Changing the Batteries” on this page above for instructions. (For an illustration, please see page 6.) • Press the POWER button to turn the television on or off. • Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if you need to operate a cable box.
REMOTE CONTROL (CONTINUED) REMOTE PROGRAMMING Setting the CATV, VCR and DVD Codes You can program your remote to operate your cable box, satellite receiver, VCR or DVD player by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manufacturer.
VCR setup The remote control is programmed with VCR codes for power on, power off, play, stop, fast-forward, rewind, pause, record, channel up, and channel down operation. 1) Find the VCR brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”. 3) Press and hold down the DISPLAY button. 4) With the DISPLAY button held down, enter the first code number listed with the 10 key pad. 5) Release the DISPLAY button.
REMOTE CONTROL (CONTINUED) DVD setup The remote control is programmed with DVD codes for power on, power off, play, stop, fast-forward, rewind, previous chapter, next chapter, tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below. 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”. 3) Press and hold down the DISPLAY button.
ANTENNA/CATV CONNECTIONS Combination VHF/UHF Antenna Single 75 ohm Cable 300 ohm Twin-lead Wire Take off the Splitter Splitter UHF Antenna 300-75 ohm Matching Transformer (not supplied) 300 ohm Twin-lead Wire IN ANT(75‰) OUT VIDEO VIDEO L/MONO L/MONO AUDIO S-VIDEO AUDIO R VIDEO 1 VIDEO 2 R Illustration of AV-24F704 This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box.
CONNECTION TO OTHER EQUIPMENT The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features of each component. Check the User’s Guide provided with each component for the location of video and audio inputs and outputs. The connection diagrams in the following are offered as suggestions. You may need to modify them to accommodate your particular assortment of components.
SETTING LANGUAGE This TV can display the channel number, on-screen displays and picture adjustments on the screen in English, Spanish or French. On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially. Select the language you prefer first, then proceed with the other menu options. 1 Press the MENU button. 2 Press the CH + (▲) or – (▼) button to select the LANGUAGE mode, then press the ENTER button.
TO MEMORIZE CHANNELS This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV's memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CATV menu option to the TV setting. When shipped from the factory, this menu option is in the CATV setting.
TO MEMORIZE CHANNELS (CONTINUED) CH LABEL You can labal every channel up to 4 characters. Channel labels will appear over the channel number display each time you select a channel. Select a channel you want to label by pressing the 10-key pad or CH + or – button. 2 Press the MENU button. 3 Press the CH + (▲) or – (▼) button until the indicator next to “CH SETUP” MENU CLOCK SET begins to flash, then press the ON/OFF TIMER CH SETUP ENTER button. PICTURE 6 Go to step 7 when you select the “SET”.
SETTING V-CHIP (CONTINUED) for U.
TV BASIC OPERATION Before operate your TV select TV position of the TV/CATV switch on the remote to control the TV with the remote. 1 2 To turn on the TV, press the POWER button. CH 012 32 The sound level will be indicated on the TV screen by green bars and a number. As the sound level increases, so do the number of bars and the number on the screen. The same is true for decreasing the level. Set the TV/CATV menu option to the appropriate position.
INPUT button Selects the signal input source for the television or Video1,2,3 or Component for video devices like VCR's, DVD players, or camcorders. The input source changes as below. VIDEO 1 VIDEO1 TV VIDEO3 VIDEO2 COMPONENT STEREO AND SEPARATE AUDIO PROGRAM (SAP) The TV is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound.
PICTURE ADJUSTMENTS You can adjust the settings for color, sharpness, contrast, brightness, tint and component. 1 2 3 4 Press the VOL + ( ) or – ( ) button to adjust the setting. Press the MENU button. Press the CH + (▲) or – (▼) button until the indicator next to “PICTURE” begins to flash, then press the ENTER button.
CLOSED CAPTION WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. Most other shows provide two or three lined Captions placed near the character who is speaking so the viewer can follow the dialogue.
ON/OFF TIMER ON TIMER SETTING This feature allows you to have the TV automatically turn ON at predetermined time. If you program the ON timer once the timer will turn ON the TV daily at the same time and to the same channel. If the power has been turned on at programmed time, the channel is changed to a programmed one. 1 Press the MENU button.
SLEEP TIMER button The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals of 10 minutes, for a total time of up to 120 minutes. SLEEP 120 • To change the sleep timer setting: Press the SLEEP TIMER button repeatedly until the display turns to desired time. • To cancel the sleep time: Press the SLEEP TIMER button repeatedly until the display turns to 0. VCR buttons You can use this remote control to operate the basic functions of your VCR.
TROUBLESHOOTING GUIDE Before requesting service, please refer to the following chart for the symptom and possible solution. SYMPTOMS POSSIBLE SOLUTIONS TV does not operate • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit for an hour, then plug it back in. • Set the 2 way selector switch on the remote control correctly (See page 6). Poor sound or No sound • Station or CATV experiencing problems, tune to another station.
SPECIFICATIONS AV-24F704 AC Power Input: AC Power Consumption: Picture Tube: Audio Power Output Rating: Speaker: Audio/Video Input: Tuner Type: Receiving Channels: VHF UHF CATV Antenna Input Impedance: Dimensions: Weight: AV-20F704 120 V, 60 Hz 105W 125W 24” (measured diagonally) 20” (measured diagonally) 2.5 W + 2.5 W 5W+5W 2” x 4-3/4”, 8 ohm x 2 COMPONENT Input: Y-Input: 1.0Vp-p, 75 ohm PB, PR-input: 0.7Vp-p, 75 ohm S-Video Input Y-Input: 1.0Vp-p, 75 ohm C-Input: 0.3Vp-p, 75 ohm Video Input: 1.
