Use & Care Guide

12




9. Secure with screws
■ Fasten the hood with 2-5 x 45 mm screws on the top and
2-4 x 45 mm screws with at washers at the bottom as
shown.
Making Electrical Connection
1. Remove tape
■ Remove the tape holding the electrical box in the hood.
2. Mount electrical box
■ Slide the electrical box onto the screws provided and tighten
it with a at head screwdriver.
Tip: Use a manual driver for this operation.
3. Connect the power cord
■ Insert the connector into the slot provided on the electrical
box.