Server Management Guide

ManualsBrandsIntel ManualsOtherIntel Server Board S2600CP4

100

Scenarios and Best Practices

Intel

Server Boards and Server Platforms Server Management Guide 85

11/14/2008 | 13:58:03 | BB +1.1V IOH | ok | 1.28 | Volts

11/14/2008 | 13:58:04 | BB +1.1V P1 Vccp | ok | 0.84 | Volts

11/14/2008 | 13:58:04 | BB +1.1V P2 Vccp | ok | 0.84 | Volts

11/14/2008 | 13:58:04 | BB +1.5V P1 DDR3 | ok | 1.52 | Volts

dpccli>

You can use the Intel

Command Line Interface to display and save the system event log on remote

management clients.

1. To display and save the System Event Log (SEL) in text format on the remote system (where the

dpcproxy is running), type:

dpccli> displaylog -F csv -O c:\UR.sel

…

1,Pre-Init Time-stamp ,Processor #0x60,Processor Presence detected

2,Pre-Init Time-stamp ,Processor #0x61,Processor Presence detected

3,Pre-Init Time-stamp ,Power Unit #0x01,Power Off/Down

4,Pre-Init Time-stamp ,Power Unit #0x01,Power Off/Down

5,Pre-Init Time-stamp ,System Event #0x83,Timestamp Clock Synch. Event Is First Of Pair.SEL

TimeStamp Updated.

6,11/14/2008,11:20:42,System Event #0x83,Timestamp Clock Synch. Event Is Second Of Pair. SEL

TimeStamp Updated.

7,11/14/2008,11:21:47,System Event #0x01,OEM System Boot Event

dpccli>

This saves the System Event Log (SEL) to c:\UR.sel on the remote management console.

2. To view the SEL, open the UR.sel file in notepad. (Open Microsoft Windows* Explorer on the

management console (laptop) and right-click the UR.sel file and open with notepad.)

3. To save the SEL to HEX format remotely, type:

displaylog –F hex –O c:\UR.sel

5.4.4 SOL success and console redirection required settings

Enable Console redirection is pre-request for you to successfully configure SOL session. In addition,

console redirection setting is slightly different across different platforms:

Table 18. Console redirection settings

Intel

Server S5000

Platform Series

Intel

Server

S5500/S5520

Platform Series

Intel

Server

S1200/S1400/S1600/S2400/S2600/S4600

Platform series

Disable console

Fail

Enable serial port A

Fail

Pass

Enable serial port B

Pass

Fail