Intel® Desktop Board DH67GD and Intel® Desktop Board DH67BL Technical Product Specification December 2012 Order Number: G13843-004 The Intel Desktop Board DH67GD and Intel Desktop Board DH67BL may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Specification Updates.
Revision History Revision Revision History Date ® ® -001 First release of the Intel Desktop Board DH67GD and Intel Board DH67BL Technical Product Specification Desktop January 2011 -002 Specification Clarification January 2012 -003 Specification Clarification January 2012 -004 Specification Clarification December 2012 This product specification applies to only the standard Intel® Desktop Board DH67GD and Intel® Desktop Board DH67BL with BIOS identifier BLH6710H.86A.
Board Identification Information Basic Desktop Board DH67GD Identification Information AA Revision BIOS Revision Notes G10206-202 BLH6710H.86A.0062 1,2 G10206-203 BLH6710H.86A.0062 1,2 G10206-204 BLH6710H.86A.0076 1,2 G10206-205 BLH6710H.86A.0076 1,2 G10206-206 BLH6710H.86A.0076 1,2 G10206-207 BLH6710H.86A.0105 1,2 G10206-208 BLH6710H.86A.0119 1,2 G10206-209 BLH6710H.86A.0119 1,2 G10206-210 BLH6710H.86A.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification Specification Changes or Clarifications The table below indicates the Specification Changes or Specification Clarifications that apply to the Intel Desktop Board DH67GD and Intel Desktop Board DH67BL.
Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for Intel® Desktop Board DH67GD and Intel® Desktop Board DH67BL. Intended Audience The TPS is intended to provide detailed, technical information about Intel Desktop Board DH67GD and Intel Desktop Board DH67BL and its components to the vendors, system integrators, and other engineers and technicians who need this level of information.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification Other Common Notation vi # Used after a signal name to identify an active-low signal (such as USBP0#) GB Gigabyte (1,073,741,824 bytes) GB/s Gigabytes per second Gb/s Gigabits per second KB Kilobyte (1024 bytes) Kbit Kilobit (1024 bits) kbits/s 1000 bits per second MB Megabyte (1,048,576 bytes) MB/s Megabytes per second Mbit Megabit (1,048,576 bits) Mbits/s Megabits per second xxh An address o
Contents 1 Product Description 1.1 Overview ......................................................................................... 11 1.1.1 Feature Summary ................................................................. 11 1.1.2 Board Layout ........................................................................ 13 1.1.3 Block Diagram ...................................................................... 15 1.2 Legacy Considerations .....................................................................
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 2.3 Jumper Block ................................................................................... 54 2.4 Mechanical Considerations ................................................................. 56 2.4.1 Form Factor .......................................................................... 56 2.5 Electrical Considerations .................................................................... 57 2.5.
Contents 5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance ...................................................................... 81 5.1.1 Safety Standards................................................................... 81 5.1.2 European Union Declaration of Conformity Statement ................ 82 5.1.3 Product Ecology Statements ................................................... 83 5.1.4 EMC Regulations .................................................................
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. x Front Panel Audio Header for AC ’97 Audio ........................................... 47 Front Panel USB Headers ................................................................... 47 SATA Connectors .........................................................................
1 Product Description 1.1 Overview 1.1.1 Feature Summary Table 1 summarizes the major features of the board. Table 1. Feature Summary Form Factor MicroATX (9.60 inches by 9.60 inches [243.84 millimeters by 243.84 millimeters]) Processor • Intel® Core™ i7, Intel® Core™ i5, and Intel® Core™ i3 processors with up to 95W TDP in an LGA1155 socket ― One PCI Express* 2.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification Table 1. Feature Summary (continued) Peripheral Interfaces • Two USB 3.0 ports are implemented with stacked back panel connectors (blue) • Fourteen USB 2.0 ports: ― Six ports are implemented with stacked back panel connectors (black) ― Eight front panel ports implemented through four internal headers • Two SATA 6.
Product Description 1.1.2 Board Layout Figure 1 shows the location of the major components on Intel Desktop Board DH67GD and Intel Desktop Board DH67BL. Figure 1.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification Table 2 lists the components identified in Figure 1. Table 2.
Product Description 1.1.3 Block Diagram Figure 2 is a block diagram of the major functional areas of the board. Figure 2.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 1.2 Legacy Considerations This board differs from other Intel Desktop Board products, with specific changes including (but not limited to) the following: • • • • • 1.
Product Description 1.4 Processor The board is designed to support the Intel Core i7, Intel Core i5, and Intel Core i3 processors in an LGA1155 socket Other processors may be supported in the future. This board is designed to support processors with a maximum wattage of 95 W Thermal Design Power (TDP). The processors listed above are only supported when falling within the wattage requirements of Intel Desktop Board DH67GD and Intel Desktop Board DH67BL.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 1.5 System Memory The board has four DIMM sockets and supports the following memory features: • • • • 1.5 V DDR3 SDRAM DIMMs with gold plated contacts, with the option to raise the voltage to support higher performance DDR3 SDRAM DIMMs. Support for 1.
Product Description 1.5.1 Memory Configurations The Intel Core i7, Intel Core i5, and Intel Core i3 processors in the LGA1155 socket support the following types of memory organization: • • • Dual channel (Interleaved) mode. This mode offers the highest throughput for real world applications. Dual channel mode is enabled when the installed memory capacities of both DIMM channels are equal.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification Figure 3 illustrates the memory channel and DIMM configuration. Figure 3. Memory Channel and DIMM Configuration NOTE The Intel Core i7, Intel Core i5, and Intel Core i3 processors require memory to be populated in the DIMM 1 (Channel A, DIMM 1) socket. For best memory performance always install memory into the blue DIMM memory sockets if only installing two DIMMs in your configuration.
Product Description Intel® H67 Express Chipset 1.6 Intel H67 Express Chipset with Direct Media Interface (DMI) interconnect provides interfaces to the processor and the USB, SATA, LPC, LAN, PCI, and PCI Express interfaces. The Intel H67 Express Chipset is a centralized controller for the board’s I/O paths. For information about Refer to The Intel H67 chipset http://www.intel.com/products/desktop/chipsets/index.htm Resources used by the chipset Chapter 2 1.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification Dynamic Video Memory Technology (DVMT) 5.0 support Support of up to 1.7 GB Video Memory with 4 GB and above system memory configuration 1.7.1.2 High Definition Multimedia Interface* (HDMI*) The HDMI port supports standard, enhanced, or high definition video, plus multichannel digital audio on a single cable.
Product Description 1.7.1.3.1 Analog Display (VGA) The VGA port supports analog displays. The maximum supported resolution is 2048 x 1536 (QXGA). The VGA port is enabled for POST whenever a monitor is attached, regardless of the HDMI and DVI-I connector status. 1.7.1.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 1.7.2 USB The board supports up to 14 USB 2.0 ports and two USB 3.0 ports. The Intel H67 Express Chipset provides the USB controller for the 2.0 ports. The two USB 3.0 ports are provided by the NEC* UPD720200 controller. The port arrangement is as follows: • • • Two USB 3.0 ports are implemented with stacked back panel connectors (blue) Six USB 2.
Product Description 1.8 SATA Interfaces The board provides six SATA connectors through the PCH, which support one device per connector: • • • • Two Two One One internal SATA 6.0 Gb/s connectors (blue) internal SATA 3.0 Gb/s connectors (black) internal eSATA 3.0 Gb/s connector (red) eSATA 3.0 Gb/s connector on the back panel for external connectivity (red) The PCH provides independent SATA ports with a theoretical maximum transfer rate of 6 Gb/s for two ports and 3 Gb/s for four ports.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 1.9 Real-Time Clock Subsystem A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 ºC with 3.
Product Description 1.11 Audio Subsystem The board supports Intel HD Audio via the Realtek ALC892 audio codec. The audio subsystem supports the following features: • • • • Advanced jack sense for the back panel audio jacks that enables the audio codec to recognize the device that is connected to an audio port. The back panel audio jacks are capable of retasking according to the user’s definition, or can be automatically switched depending on the recognized device type.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification The back panel audio connectors are configurable through the audio device drivers. The available configurable back panel audio connectors are shown in Figure 4. Item Description A Rear surround B Center channel and LFE (subwoofer) C S/PDIF out (optical) D Line in E Mic in/side surround F Line out/front speakers Figure 4.
Product Description 1.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 1.12.2 LAN Subsystem Software LAN software and drivers are available from Intel’s World Wide Web site. For information about Refer to Obtaining LAN software and drivers http://downloadcenter.intel.com 1.12.3 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 5 below). Item Description A Link LED (Green) B Data Rate LED (Green/Yellow) Figure 5.
Product Description 1.13 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including the following: • • Thermal and voltage monitoring Chassis intrusion detection 1.13.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 1.13.4 Thermal Monitoring Figure 6 shows the locations of the thermal sensors and fan headers. Item Description A Rear chassis fan header B Thermal diode, located on the processor die C Processor fan header D Front chassis fan header E Thermal diode, located on the Intel H67 PCH Figure 6.
Product Description 1.14 Power Management Power management is implemented at several levels, including: • • Software support through Advanced Configuration and Power Interface (ACPI) Hardware support: Power connector Fan headers LAN wake capabilities Instantly Available PC technology Wake from USB Power Management Event signal (PME#) wake-up support PCI Express WAKE# signal support Wake from Consumer IR 1.14.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 1.14.1.1 System States and Power States Under ACPI, the operating system directs all system and device power state transitions. The operating system puts devices in and out of low-power states based on user preferences and knowledge of how devices are being used by applications. Devices that are not being used can be turned off.
Product Description 1.14.1.2 Wake-up Devices and Events Table 11 lists the devices or specific events that can wake the computer from specific states. Table 11. Wake-up Devices and Events These devices/events can wake up the computer… …from this state Power switch S3, S4, S5 RTC alarm S3, S4, S5 LAN S3, S4, S5 USB S3 PME# signal S3, S4, S5 WAKE# S3, S4, S5 Consumer IR S3, S4, S5 (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) (Note 2) Notes: 1. S4 implies operating system support only.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification NOTE The use of Wake from USB from an ACPI state requires an operating system that provides full ACPI support. 1.14.2.1 Power Connector ATX12V-compliant power supplies can turn off the system power through system control. When an ACPI-enabled system receives the correct command, the power supply removes all non-standby voltages.
Product Description 1.14.2.3 LAN Wake Capabilities CAUTION For LAN wake capabilities, the +5 V standby line for the power supply must be capable of providing adequate +5 V standby current. Failure to provide adequate standby current when implementing LAN wake capabilities can damage the power supply. LAN wake capabilities enable remote wake-up of the computer through a network. The LAN subsystem PCI bus network adapter monitors network traffic at the Media Independent Interface.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 1.14.2.5 Wake from USB USB bus activity wakes the computer from an ACPI S3 state. NOTE Wake from USB requires the use of a USB peripheral that supports Wake from USB. 1.14.2.6 PME# Signal Wake-up Support When the PME# signal on the PCI Conventional bus is asserted, the computer wakes from an ACPI S3, S4, or S5 state (with Wake on PME enabled in the BIOS). 1.14.2.
Product Description 1.14.2.10 +5 V Standby Power Indicator LED The +5 V standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 7 shows the location of the standby power LED. CAUTION If AC power has been switched off and the standby power indicator is still lit, disconnect the power cord before installing or removing any devices connected to the board. Failure to do so could damage the board and any attached devices. Figure 7.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 40
2 Technical Reference 2.1 Memory Resources 2.1.1 Addressable Memory The board utilizes 32 GB of addressable system memory. Typically the address space that is allocated for PCI Conventional bus add-in cards, PCI Express configuration space, BIOS (SPI Flash device), and chipset overhead resides above the top of DRAM (total system memory).
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification Figure 8.
Technical Reference 2.1.2 Memory Map Table 12 lists the system memory map. Table 12.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 2.2.1 Back Panel Connectors Figure 9 shows the location of the back panel connectors for the board. Item Description A B C D E F USB 2.0 ports eSATA connector LAN port USB 2.0 ports USB 2.0 ports DisplayPort connector (DH67GD only) DVI-I connector HDMI connector IEEE 1394a connector USB 3.
Technical Reference 2.2.2 Component-side Connectors and Headers Figure 10 shows the locations of the component-side connectors and headers. Figure 10.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification Table 13 lists the component-side connectors and headers identified in Figure 10. Table 13.
Technical Reference 2.2.2.1 Signal Tables for the Connectors and Headers Table 14. IEEE 1394a Header (DH67GD only) Pin Signal Name Pin Signal Name 1 Data A (positive) 2 Data A (negative) 3 Ground 4 Ground 5 Data B (positive) 6 Data B (negative) 7 +12 V DC 8 +12 V DC 9 Key (no pin) 10 Ground Table 15.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification Table 18. SATA Connectors Pin Signal Name 1 Ground 2 TXP 3 TXN 4 Ground 5 RXN 6 RXP 7 Ground Table 19. S/PDIF Header Pin Signal Name 1 Ground 2 S/PDIF out 3 Key (no pin) 4 +5 V DC Table 20. Chassis Intrusion Header Pin Signal Name 1 Intruder# 2 Ground Table 21.
Technical Reference Table 23. Front Panel CIR Receiver (Input) Header Pin Signal Name 1 Ground 2 LED 3 NC 4 Learn-in 5 5 V standby 6 VCC 7 Key (no pin) 8 CIR Input 2.2.2.2 Add-in Card Connectors The board has the following add-in card connectors: • • • PCI Express 2.0 x16: one PCI Express 2.0 x16 connector supporting simultaneous transfer speeds up to 8 GB/s of peak bandwidth per direction and up to 16 GB/s concurrent bandwidth. PCI Express 2.0 x1: two PCI Express 2.0 x1 connectors.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 2.2.2.3 Power Supply Connectors The board has the following power supply connectors: • • Main power – a 2 x 12 connector. This connector is compatible with 2 x 10 connectors previously used on Intel Desktop boards. The board supports the use of ATX12V power supplies with either 2 x 10 or 2 x 12 main power cables.
Technical Reference 2.2.2.4 Front Panel Header This section describes the functions of the front panel header. Table 26 lists the signal names of the front panel header. Figure 11 is a connection diagram for the front panel header. Table 26.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 2.2.2.4.3 Power/Sleep LED Header Pins 2 and 4 can be connected to a one- or two-color LED. Table 27 shows the possible states for a one-color LED. Table 28 shows the possible states for a two-color LED. Table 27. States for a One-Color Power LED LED State Description Off Power off/sleeping Steady Green Running Table 28.
Technical Reference 2.2.2.6 Front Panel USB 2.0 Headers Figure 12 is a connection diagram for the front panel USB 2.0 headers. NOTE • • The +5 V DC power on the USB headers is fused. Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 12. Connection Diagram for Front Panel USB 2.0 Headers 2.2.2.7 Low Pin Count (LPC) Debug header During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O port 80h.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 2.3 Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 13 shows the location of the jumper block. The 3-pin jumper block determines the BIOS Setup program’s mode. Table 31 describes the jumper settings for the three modes: normal, configure, and recovery.
Technical Reference Table 31. BIOS Setup Configuration Jumper Settings Function/Mode Jumper Setting Configuration Normal 1-2 The BIOS uses current configuration information and passwords for booting. Configure 2-3 After the POST runs, Setup runs automatically. The maintenance menu is displayed. Note that this Configure mode is the only way to clear the BIOS/CMOS settings. Press F9 (restore defaults) while in Configure mode to restore the BIOS/CMOS settings to their default values.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 2.4 2.4.1 Mechanical Considerations Form Factor The board is designed to fit into an ATX-form-factor chassis. Figure 14 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 9.60 inches by 9.60 inches [243.84 millimeters by 243.84 millimeters]. Location of the I/O connectors and mounting holes are in compliance with the ATX specification.
Technical Reference 2.5 Electrical Considerations 2.5.1 Power Supply Considerations CAUTION The +5 V standby line from the power supply must be capable of providing adequate +5 V standby current. Failure to do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options. Additional power required will depend on configurations chosen by the integrator.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 2.5.2 Fan Header Current Capability CAUTION The processor fan must be connected to the processor fan header, not to a chassis fan header. Connecting the processor fan to a chassis fan header may result in onboard component damage that will halt fan operation. Table 34 lists the current capability of the fan headers. Table 34. Fan Header Current Capability Fan Header Maximum Available Current Processor fan 2.
Technical Reference CAUTION Ensure that the ambient temperature does not exceed the board’s maximum operating temperature. Failure to do so could cause components to exceed their maximum case temperature and malfunction. For information about the maximum operating temperature, see the environmental specifications in Section 2.8. CAUTION Ensure that proper airflow is maintained in the processor voltage regulator circuit. Failure to do so may result in damage to the voltage regulator circuit.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification Table 35 provides maximum case temperatures for the components that are sensitive to thermal changes. The operating temperature, current load, or operating frequency could affect case temperatures. Maximum case temperatures are important when considering proper airflow to cool the board. Table 35.
Technical Reference 2.7 Reliability The Mean Time Between Failures (MTBF) prediction is calculated using component and subassembly random failure rates. The calculation is based on the Telcordia SR-332, Method I Case 1 50% electrical stress, 55 ºC ambient. The MTBF prediction is used to estimate repair rates and spare parts requirements. The MTBF data is calculated from predicted data at 55 ºC.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 62
3 Overview of BIOS Features 3.1 Introduction The board uses an Intel BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support. The BIOS displays a message during POST identifying the type of BIOS and a revision code. The initial production BIOSs are identified as BLH6710H.86A.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification Table 38 lists the BIOS Setup program menu features. Table 38.
Overview of BIOS Features 3.4 System Management BIOS (SMBIOS) SMBIOS is a Desktop Management Interface (DMI) compliant method for managing computers in a managed network. The main component of SMBIOS is the Management Information Format (MIF) database, which contains information about the computing system and its components. Using SMBIOS, a system administrator can obtain the system types, capabilities, operational status, and installation dates for system components.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification To install an operating system that supports USB, verify that Legacy USB support in the BIOS Setup program is set to Enabled and follow the operating system’s installation instructions. 3.
Overview of BIOS Features 3.6.2 Custom Splash Screen During POST, an Intel® splash screen is displayed by default. This splash screen can be augmented with a custom splash screen. The Intel Integrator’s Toolkit that is available from Intel can be used to create a custom splash screen. NOTE If you add a custom splash screen, it will share space with the Intel branded logo. 3.7 For information about Refer to Intel Integrator Toolkit http://developer.intel.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 3.8 Boot Options In the BIOS Setup program, the user can choose to boot from a hard drive, optical drive, removable drive, or the network. The default setting is for the optical drive to be the first boot device, the hard drive second, removable drive third, and the network fourth. 3.8.
Overview of BIOS Features 3.9 Adjusting Boot Speed These factors affect system boot speed: • • • Selecting and configuring peripherals properly Optimized BIOS boot parameters Enabling the new Hyperboot feature 3.9.1 Peripheral Selection and Configuration The following techniques help improve system boot speed: • • • • Choose a hard drive with parameters such as “power-up to data ready” in less than eight seconds that minimizes hard drive startup delays.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 3.10 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup program and for booting the computer, with the following restrictions: • • • • • • • The supervisor password gives unrestricted access to view and change all the Setup options in the BIOS Setup program.
Overview of BIOS Features 3.11 BIOS Performance Features The BIOS includes the following options to provide custom performance enhancements when using Intel Core i7, Intel Core i5, and Intel Core i3 processors in an LGA1155 socket.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 72
4 Error Messages and Beep Codes 4.1 Speaker The board-mounted speaker provides audible error code (beep code) information during POST. 4.2 For information about Refer to The location of the onboard speaker Figure 1, page 13 BIOS Beep Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s speaker to beep an error message describing the problem (see Table 43). Table 43. BIOS Beep Codes Type Pattern Frequency F2 Setup/F10 Boot Menu Prompt One 0.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 4.3 Front-panel Power LED Blink Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s front panel power LED to blink an error message describing the problem (see Table 44). Table 44. Front-panel Power LED Blink Codes Type Pattern F2 Setup/F10 Boot Menu Prompt None Note BIOS update in progress Off when the update begins, then on for 0.5 seconds, then off for 0.5 seconds.
Error Messages and Beep Codes 4.5 Port 80h POST Codes During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O port 80h. If the POST fails, execution stops and the last POST code generated is left at port 80h. This code is useful for determining the point where an error occurred. Displaying the POST codes requires a POST card that can interface with the Low Pin Count (LPC) Debug header.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification Table 47.
Error Messages and Beep Codes Table 47.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification Table 47.
Error Messages and Beep Codes Table 47. Port 80h POST Codes (continued) Port 80 Code Progress Code Enumeration 0xB8 Resetting removable media 0xB9 Disabling removable media 0xBA Detecting presence of a removable media (IDE, CDROM detection etc.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification Table 48.
5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance This section contains the following regulatory compliance information for Intel Desktop Board DH67GD and Intel Desktop Board DH67BL: • • • • • 5.1.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 5.1.
Regulatory Compliance and Battery Disposal Information Portuguese Este produto cumpre com as normas da Diretiva Européia 2004/108/EC, 2006/95/EC & 2002/95/EC. Español Este producto cumple con las normas del Directivo Europeo 2004/108/EC, 2006/95/EC & 2002/95/EC. Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív 2004/108/EC, 2006/95/EC a 2002/95/EC. Slovenščina Izdelek je skladen z določbami evropskih direktiv 2004/108/EC, 2006/95/EC in 2002/95/EC.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification Español Como parte de su compromiso de responsabilidad medioambiental, Intel ha implantado el programa de reciclaje de productos Intel, que permite que los consumidores al detalle de los productos Intel devuelvan los productos usados en los lugares seleccionados para su correspondiente reciclado. Consulte la http://www.intel.
Regulatory Compliance and Battery Disposal Information Russian В качестве части своих обязательств к окружающей среде, в Intel создана программа утилизации продукции Intel (Product Recycling Program) для предоставления конечным пользователям марок продукции Intel возможности возврата используемой продукции в специализированные пункты для должной утилизации. Пожалуйста, обратитесь на веб-сайт http://www.intel.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions related to the EMC performance of this product, contact: Intel Corporation, 5200 N.E.
Regulatory Compliance and Battery Disposal Information Japan VCCI Statement Japan VCCI Statement translation: This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 5.1.5 ENERGY STAR* 5.0, e-Standby, and ErP Compliance The US Department of Energy and the US Environmental Protection Agency have continually revised the ENERGY STAR requirements. Intel has worked directly with these two governmental agencies in the definition of new requirements.
Regulatory Compliance and Battery Disposal Information 5.1.6 Regulatory Compliance Marks (Board Level) Intel Desktop Board DH67GD and Intel Desktop Board DH67BL have the regulatory compliance marks shown in Table 51. Table 51. Regulatory Compliance Marks Description Mark UL joint US/Canada Recognized Component mark. Includes adjacent UL file number for Intel Desktop Boards: E210882. FCC Declaration of Conformity logo mark for Class B equipment. CE mark.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. PRÉCAUTION Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées doivent être recyclées dans la mesure du possible.
Regulatory Compliance and Battery Disposal Information PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del fabricante. WAARSCHUWING Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij. Batterijen moeten zoveel mogelijk worden gerecycled.
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi przepisami ochrony środowiska.
Regulatory Compliance and Battery Disposal Information 93
Intel Desktop Board DH67GD and Intel Desktop Board DH67BL Technical Product Specification 94
