Specification

INSULTEX HOUSE WRAP R-3 and R-6
FACT SHEET
Manufactured by:
Innovative Designs, Inc.
124 Cherry St.
Pittsburgh, PA, 15223
P: 412-799-0350
F: 412-782-5303
Web Site: insultexhousewrap.com
This fact sheet contains important information about Insultex House Wrap. Please read it carefully.
TYPE OF INSULATION:
House Wrap
Sq. Ft.
R-Value
Length
Width
Thickness
Per Roll
3.0
100'
58"/60"
1.0mm
500
6.0
100'
58"/60"
1.5mm
500
READ THIS BEFORE YOU BUY
What you should know about R-values;
This chart shows the R-value of this insulation. R means resistance to heat flow. The higher
the R-value, the greater the insulating power. Compare insulation R-values before you buy.
There are other factors to consider. The amount of insulation you need depends mainly on
the climate you live in. Also, your fuel savings from insulation will depend upon climate, the
type and size of your house, the amount of insulation already in your house, and your fuel use
patterns and family size. If you buy too much insulation, it will cost you more than you’ll save
on fuel.
To get the marked R-value, it is essential that this insulation be installed properly. Get
instructions for installation and follow them carefully.