Quick Setup Guide

ManualsBrandsInsignia ManualsSpeakerNS-0S312 Speaker

PACKAGE CONTENTS

• Speakers (2)

• Wall-mount brackets (2)

• Screws (4)

• Knobs (4) (For wall mounting)

• Quick Setup Guide

1 CONNECT YOUR SPEAKERS

1 Connect the red speaker terminals to the red (+) amplier terminals.

2 Connect the black speaker terminals to the black (-) amplier terminals.

See the documentation that came with your amplier or home theater system

for more information on connecting the cables.

Note: For best performance, speaker wires must be connected correctly. All two-conductor wire

is marked in some way to help with this. One side will be marked with a colored stripe, raised

rib, or dierent-color conductor. Use the marked side for the “red” connections. We recommend

using 18-gauge or heavier speaker wire.

Quick Setup Guide

NS-OS312

2-Way Outdoor Speakers

Before using your new product, please read

these instructions to prevent any damage.

Congratulations on your purchase of a high-quality Insignia product. Your 2-Way Outdoor Speakers are designed for reliable and trouble-free performance.

2 INSTALL WALLMOUNT BRACKETS

NOTE: If you are installing your speakers outdoors, select locations

facing your listening area that are protected from rain and snow, and

are out of direct sunlight.

1 Screw the wall-mount brackets onto the wall where

you want to mount the speakers. If the location is

backed by wooden wall studs, you can use the wood

screws provided. If the location is backed by only dry

wall, concrete, or other wall types, use wall anchors

(not included).

2 Slide a speaker into each mounting bracket.

3 Line up the screw holes (one on top, one on bottom),

then screw a knob into each hole to secure the

speaker to the bracket. You can loosen the knobs to

adjust the direction the speakers are pointing.

Amplier/home

theater system

Note: Make sure to

connect the + terminal on

the speaker to the

+ terminal on the amplier

and connect the - terminal

on the speaker to the

- terminal on the

amplier.

Flat size (W×H): 297 × 210 mm.

Final folded size: 99 × 210 mm.

NS-OS312_14-1140_QSG_V2_EN.ai 1 10/7/2014 3:06:33 PMNS-OS312_14-1140_QSG_V2_EN.ai 1 10/7/2014 3:06:33 PM

FINAL

FOR PRINT

Summary of content (2 pages)

PAGE 1
V2 FINAL FOR PRINT NS-OS312_14-1140_QSG_V2_EN.ai 1 10/7/2014 3:06:33 PM Flat size (W×H): 297 × 210 mm. Final folded size: 99 × 210 mm. Quick Setup Guide I NS-OS312 2-Way Outdoor Speakers Congratulations on your purchase of a high-quality Insignia product. Your 2-Way Outdoor Speakers are designed for reliable and trouble-free performance.
PAGE 2
NS-OS312_14-1140_QSG_V2_EN.ai 2 10/7/2014 3:06:41 PM SAFETY INFORMATION • Never set the volume above the point of audio distortion or you could damage your speakers very quickly. • If you hear distortion, immediately turn down the volume. If you do not, the resulting damage is not covered by the warranty. SPECIFICATIONS • • • • 8 ohm nominal impedance 70 Hz - 20 kHz frequency response Sensitivity: 85 dB 1W (2.83V)-1M Each speaker dimension: (without bracket) 9.1 H × 6 W × 5.1 D in. (23 × 15.2 × 12.