Film Processing Chart

FILM PROCESSING CHART
20°C / 68°F TIME (mins):(secs)
EI 25 50 50 125 200 200 250 320 400 800 1600 3200 50 100 200 200 250 320 400 500 800 1600 3200 400 800 1600 3200 6400 12500
80 (DAYLIGHT)
40 (TUNGSTEN)
200 400 800 50 100 200 320 400 800
ILFOTEC DD-X 1+4
07:00 08:00 08:00 10:00 12:00 09:00 10:00 13:00 20:00 08:00 10:30 12:30 06:00 08:00 09:30 10:30 13:30 18:00 06:00 07:00 08:00 09:30 12:30 17:00 10:30 10:00 14:00 08:30 10:30 12:30 11:30 13:00
1+9
04:00 05:00 03:30 05:00 07:30 11:00 04:00 05:30 07:30 13:00 05:00 08:00 13:00 04:00 05:00 07:00 10:30 04:00 05:00 04:30 06:30
1+19
04:00 06:00 08:00 09:00 06:30 09:30 14:00 05:00 06:00 08:00 05:00 07:30 10:00 13:30 06:00 07:30 09:00 14:30 06:00 09:00 13:00 19:00 05:30 07:00 08:00 08:00 12:30
1+29
05:30 08:00 12:00 09:00 05:30 07:30 10:00 08:30 11:30 17:00 11:00 07:30 11:00 11:00
1+15
04:00 05:00 03:30 05:00 07:30 11:00 04:00 05:30 07:30 13:00 05:00 08:00 13:00 04:00 05:00 07:00 10:30 04:00 05:00 04:30 06:30
1+31
04:00 06:00 08:00 09:00 06:30 09:30 14:00 05:00 06:00 08:00 05:00 07:30 10:00 13:30 06:00 07:30 09:00 14:30 06:00 09:00 13:00 19:00 05:00 06:30 08:00 08:00 12:30
1+9
04:15 05:00 06:30 13:30 05:00 05:30 07:00 14:00 06:00 07:30 10:00 11:00 18:00 05:00 06:00 08:30 05:00 06:30 15:00
1+14
04:30 07:30 07:00 11:00 19:30 07:30 08:00 12:00 20:30 11:00 13:00 15:30 17:00 23:00 07:00 09:00 13:30 07:30 11:00 25:00
Stock
04:30 06:30 06:30 08:30 10:00 07:30 10:30 14:00 07:00 08:30 10:30 07:00 09:30 11:30 14:30 19:00 07:00 08:00 09:30 10:30 13:00 17:00 08:00 10:00 14:00 18:00 07:00 09:00 11:00 09:30 13:00
1+1
06:00 08:30 08:00 11:00 15:00 13:00 16:30 10:00 11:00 13:00 10:00 14:00 17:30 10:30 17:00 08:30 11:30 15:30 16:30 20:30
1+3
12:30 15:00 17:00 20:00 20:00 15:00 20:00 18:00 16:00 17:30 21:00 25:30
Stock
04:30 08:00 09:00 06:30 08:00 11:00 16:00 06:30 08:00 05:00 06:30 07:30 08:30 10:30 14:00 06:00 07:00 08:00 09:00 12:00 16:30 09:00 08:30 10:30 14:30 08:30 09:00 08:00 10:00
1+1
06:00 10:00 14:00 12:00 15:00 10:00 14:00 08:30 11:30 13:30 15:30 19:00 11:30 15:30 19:00 10:30 14:00 15:00 19:00
1+3
11:00 14:00 18:00 23:00 14:00 20:00 16:00 13:30 14:30
Stock
09:00 14:00 09:00 12:00 13:00 12:00 15:00 10:00 12:00 11:00 13:00 15:00 18:00 13:00 14:30 09:30 12:30
1+1
10:30 15:00 13:00 15:00 18:00 13:00 17:00 12:30 15:30 20:00 13:30 15:30 23:00
1+3
15:00 17:00 17:00 21:00 25:00 16:00 22:00 18:30
CAUTION:
These times are intended as a guide only. Times shorter than 5 minutes may lead to uneven development
AGITATION:
FIXATION:
WASHING:
* We recommend using ILFORD developers with ILFORD films. For developing times with non-ILFORD developers we recommend using the Massive Dev Chart (http://www.digitaltruth.com/devchart.php) by Digitaltruth Photo.
Nb. Development times with non-ILFORD products have not been verified by us.
Version: October 2019
ID11
KENTMERE PAN
100
MICROPHEN
ILFOTEC LC29
PERCEPTOL
ILFOTEC HC
For manual processing in spiral tanks and deep tanks, the development times are based on intermittent agitation. With spiral tanks, invert the tank 4 times during the first 10 seconds, then invert a
further 4 times during the first 10 seconds for each further minute. Where continuous agitation is used for manual processing (as in a dish/tray or with some types of developing tank), reduce these
times by up to 15%. For use in rotary processors without a pre-rinse, reduce the spiral tank development times by up to 15%. A pre-rinse is not recommended as it can lead to uneven processing.
DELTA 400 PROFESSIONAL
DELTA 3200 PROFESSIONAL
SFX 200
Where a non-hardening fixer such as RAPID FIXER or HYPAM has been used, wash the film in running water for 5-10 minutes at a temperature within 5°C/9°F of the processing temperature. To aid
rapid, even drying, after washing fill the tank with water and add ILFORD ILFOTOL Wetting Agent (1+200) and give the tank a final 5 inversions.
After development, rinse the film in water or ILFORD ILFOSTOP (1+19) for 10-30 seconds at 20°C/68°F and then fix in RAPID FIXER or HYPAM (1+4) for 2-5 minutes at 20°C/68°F.
Dilution
ILFOSOL 3
ORTHO PLUS
KENTMERE PAN
400
PANF PLUS
FP4 PLUS
DELTA 100
PROFESSIONAL
HP5 PLUS
Developer