F166 LVDS24-01-R10 V1.01 XC3S200AN Jumper setting & Connection Rev: 1.
Appendix Jumper setting...............................................................................................3 1.1 LVDS Data Format Selection .........................................................4 1.2 Input Channel Selection .................................................................4 1.3 Output Channel Selection ..............................................................5 1.4 Mend bit setting ................................................................................
1 Jumper setting Table of Jumpers ITEM 1.1 1.2 1.3 1.
1.1 LVDS Data Format Selection To choice LVDS data format (you can get the information from LVDS panel spec). • J_PID1 : Clear CMOS Setup J_PID1 DESCRIPTION Short 1-2 24.1 (default)* Short 2-3 24.0 3 2 1 1.2 Input Channel Selection To choice the input signal,18bits or 36bits.
1.3 Output Channel Selection To choice the output signal,24bits or 48bits. • J_PID3 : Output Channel Selection J_PID3 DESCRIPTION Short 1-2 48bits(dual channel) (default)* Short 2-3 24bits(single channel) 3 2 1 1.
2 Connection This chapter describes how to connect peripherals, switches and indicators to the LVDS24-01-R10 V1.01 board.
Table of Connectors ITEM 2.1 2.2 2.
2.1 LCD Panel LVDS Interface Connector (LVDS1_IN) The product equipped with LVDS interface connector to provide high resolution color display. • LVDS1_IN: LVDS Connector PIN NO. DESCRIPTION PIN NO.
2.2 LCD Panel LVDS Interface Connector (LVDS2_OUT) The product equipped with LVDS interface connector to provide high resolution color display. • LVDS2_OUT: LVDS Connector PIN NO. DESCRIPTION PIN NO.
2.3 Power Source Connector The product supports the ATX power. It provide +5V Power. •CN1 :POWER Connector CN1 & CN2 PIN NO. DESCRIPTION PIN NO.
