HYP E R AQ80002G TOUGH 20V MAX HT CHARGE LITHIUM-ION CORDLESS RECIPROCATING SAW INSTRUCTION MANUAL Maximum Initial battery voltage {(measured without Road) is 20 Volts. Nominal voltage Is 18. Electronic Version of this Manual Available on Walmart.
Personal safety.. Power tool use and cai Additional safety rules. Specific safety rules.. Symbols. Charging & Operation. Troubleshooting & Maintenance. CALIFORNIA PROP 65 WARNING * Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
20V Max Cordless Reciprocating Saw Overview A Tool less blade collect B. Lock-off button Trigger D. Battery release button E. Battery pack b F. Battery charger . G.Shoe Please read before resuming this product for any reason: If you have question or experience a problem with your Hyper Tough purchase, call 1-800-840-7856 from 8:00 a.m. to 8:00 p.m. Eastern Standard Time, Monday through Friday. SAFETY GUIDELINES Be sure to read and understand this manual for your safety.
20V Max Cordless Reciprocating Saw Workplace/Electrical Safety SAVE THESE WARNINGS AND INSTRUCTIONS 'YOU MAY NEED TO REFER TO THEM LATER The term “power too!” in the WARNING refers to your AC power(corded) power too or battery-operated (cordless) power tool. SAVE THESE INSTRUCTIONS WORK AREA SAFETY 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such sin the presence of flammable liquids, gases or dust.
20V Max Cordless Reciprocating Saw Personal safety/Power tool use and care PERSONAL SAFETY 1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. 2. Use personal protective equipment. Always wear eye protection.
20V Max Cordless Reciprocating Saw Additional safety rules parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. 6. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. 7. Use the power tool, accessories and tool bits etc.
20V Max Cordless Reciprocating Saw Additional safety rules WARNING: Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
20V Max Cordless Reciprocating Saw Symbols is firmly secured with clamps or other reliable means. Do not try to hold them by hand or against your body you might lose control and be injured. 8. Keep hair, clothing or gloves away from air vents, as they may become entangles in the moving mechanism around these areas. 9. Hold the tool firmly with both hands. Use the auxiliary handle if available; if there no auxiliary handle, grip the handle at the bottom.
20V Max Cordless Reciprocating Saw Operation BEFORE ATTEMPTING TO CHARGE YOUR BATTERY PACK, THOROUGHLY READ ALL THE SAFETY INSTRUCTIONS. CAUTION: *The battery s not fully charged. Before first use, the battery pack requires 5-7 hours charge time to b fully charged. Subsequent recharging needs 3-4 hours for the battery to be fully charged.
20V Max Cordless Reciprocating Saw Operation TOOL / BATTERY PROTECTION SYSTEM The tool is equipped with a tool/battery protection system. This system automatically cuts off power to the motor to extend tool and battery life. The tool will automatically stop during operation if the tool or battery is placed under one of the following conditions: OVERLOAD PROTECTION When the battery is operated in a manner that causes it to draw an abnormally high current, the tool automatically stops without any indication.
20V Max Cordless Reciprocating Saw Operation OPERATION /\ WARNING: Before cutting any type of material, be sure it is firmly anchored or clamped to prevent slipping. 1. Place blade and shoe lightly against work to be cut. 2. Switch on saw motor and allow it to obtain maximum speed before applying pressure. 3. Always hold the saw firmly with both hands while cutting. Whenever possible, the shoe must be held firmly against the material being cut.
20V Max Cordless Reciprocating Saw Operation CUTTING ACTION The saw blade is doing mast of its cutting as it travels towards the operator. Depending on the type of material and cutting speed, this can cause splintering on the surface of the work piece that is facing the operator. Therefore, if possible, position yourself or the work piece so that the desired “good” side of the work piece is facing away from the operator. GENERAL CUTTING Clamp your work piece if it is portable.
20V Max Cordless Reciprocating Saw Recycling 3. Inspect the cord regularly and have it replaced by an authorized repair facility if it is damaged. 4. Lubrication for this tool is done at the factory and should not be necessary again under normal use. 5. To maintain the best performance of your rechargeable Li-ion battery, protect it from overheating, both from overcharging and during storage. Occasionally charge the battery for 7 hours. The battery may also benefit from a full discharge from time to time.
20V Max Cordless Reciprocating Saw Specifications/Warranty /\ WARNING: Only use recommended accessories-use of unauthorized accessories can be hazardous and/or result in injury or damage. This product is not intended for commercial use. SPECIFICATIONS »Product model: AQ80002G + Rated voltage: 20V Max DC + Battery pack model: AQ90050G +» Charger model: EBSO090A-2000450AU Input: 0.3A Output: 20.0V 450mAh »Machine Weight: ~ 4.45 Ibs. (2.
