ON OFF s Short press function button (about 1 second), the headphones will be an, and the power on indicator wil light vibe steadily. & Long press multi function button (about § seconds), the headphones wil be off. & When active nose cancellation Is ON (ANC button Is pressed, and the ANC indicator lights green), the headphones will keep power an, When active noise cancellation is OFF, the headphones will automatically tum aff in 5 minutes if no connection with Bluetooth device.
3 Pairing: blue and red indicator flashes alternately Connected: hie indicator flashes every 10 seconds # When muted on, JZ02 will automatically connect to the last connected devices if available. If not, JZ02 will go to pairing. % Ta connect tn a new device: tum Bluetooth off of connected advice. Then tum Bluetooth on of the new device and select 1202 to connect. Having connection problem? Delete JZ02 from the device's Bluetooth list, and re-connect.
Press the ANC button, the active noise cancellation will be on, and the ANC led indicator wil light green steadily.
© Connect to two Bluetooth devices at the same time to switch between calls, video conferencing, listening to muse, and more without re connection. # For example, when connected to laptop and phone simultaneously, you ean pause the playing fim an the laptop, and switch to the phone to play the paused music. No need re connection.
Next track/Previous track Long press the button (more than 1 second) 1G tr, Volume up/down Volume up/down
% When connected via AUX, play audio directly via the connected device % 3.5mm Audio Jack: You can usa it as wired headphones. ‘They give the sound an improvement when using the head panes wired In. When the battery Is low or If you want to conserve battery, just switch the wireless mods to wired made, keep listening with the headphones jack.
® 1202 will beep every 2 minutes when it's an low battery. @ Charging: Indicator wil light red steadily.
"met | sia Charging Time 2405th Playtime >40h Size 1BONBSH200 mm Weight 8507/2455 Bluetooth Range 33M/10m Don't remove any parts. Avoid dropping. Do nat use under weather conditions or extreme temperatures.
= Microphone Usage Tips +The use of the microphone deans to be converted ta Bluetooth mode connection. « Earmuffs should not be disassembled or assembled without permission. The earmuffs and ear shells ane directly attached to the buckles. If they have been disassembled, please check whether each buckle has been unsorted into the earmuffs.
Russ your headphones = When the headphone is on, press and hold the MFB (power button volume + button) at the same time for 5 seconds, and then restart t complete the reset operation. ‘Warm Prompt « Headphones will smell because of the material, If the headphone smells, you should open and leave It for 10-30 minutes before using. « When the headphones cannot be turned on normally the first time you use It, please charging It for 10-30 minutes before using. Customer Support wwwhrosenilive.
