System Startup, Configuration, and Shutdown Reference Manual (32650-90892)

200 AppendixB
Startup, Dump, and Shutdown Listings
Shutdown Sequence
Shutdown Sequence
This sequence, unlike the previous four, begins at the MPE prompt. (Presumably, the
system is up and running before it is shut down.) Refer to Chapter 9 , “Halting System
Activity,” for information on the steps involved in shutting down the system.
The following represents a shutdown sequence for the N-Class systems received at the
console. Sequences from other installations may vary.
:TELL @S;SHUTDOWN IN 15 MINUTES. PLEASE LOG OFF.
:LIMIT 0,0
:JOBFENCE 14
:SHOWOUT SP
NO SUCH FILE(S)
:WARN @S;SYSTEM SHUTDOWN IN 2 MINUTES. PLEASE LOG OFF.
:SHOWJOB JOB=@S
JOBNUM STATE IPRI JIN JLIST INTRODUCED JOB NAME
#S669 EXEC 20 20 WED 8:22A OPERATOR.SYS
1 JOBS (DISPLAYED)
0 INTRO
0 WAIT; INCL 0 DEFERRED
1 EXEC; INCL 1 SESSIONS
0 SUSP
JOBFENCE= 14; JLIMIT=0; SLIMIT=0
:WARN @S;SYSTEM SHUTDOWN IN 1 MINUTE. ALL USERS WILL&
BE LOGGED OFF AT THAT TIME.
:CTRL A
=SHUTDOWN
Shutdown of operating system begins. (Shut 1)
Shutdown of user processes begins. (Shut 2)
Shutdown of jobs & sessions begins. (Shut 3)
Spoolers notified of a shutdown. (Shut 16)
13:11/39/Output spooler, LDEV #6: Cannot open physical device.
13:11/39/Output spooler, LDEV #6: Stopped.
13:11/38/The Spooling system has been shutdown.
Shutdown of system processes begins. (Shut 4)
ShutShutdown of operating system complete. (Shut 6)