SNA Link/iX Node Managers Guide (30291-90507)

Chapter 2 65

SNA Node and Link Conﬁguration

Conﬁguring the SNA Node and Link

SDLC Link Data Screen

Once you have speciﬁed the PU and LU information, you are ready to

conﬁgure the communications link parameters and the phone data for

the SDLC link. You do this on the screen shown in Figure 2-7, “SDLC

Link Data Screen.” Select this screen by pressing

[f1] (Go To LINKDATA)

on the screen shown in Figure 2-4, “PU Data Screen.” (You can go

directly to this screen from any screen by typing

@SNANODE.

nodename

.LINKDATA in the command window and pressing

[ENTER]).

Figure 2-7 SDLC Link Data Screen

Fields Path

For display only. The NMMGR path to this screen. It

includes the name of the SNA node you are conﬁguring.

Physical Path

Required. The address of the PSI. At system start-up

time, this address is assigned according to the slot the

PSI is in. The value you enter here is determined by

one of these formulas:

• If only one card cage is present:

4 X

SlotNumber

where (a) X is the multiplication sign (

not

the

character “X”), and (b)

SlotNumber

is the number of

the slot the PSI is in.