pppoerd.conf.4 (2010 09)

pppoerd.conf(4) pppoerd.conf(4)

NAME

pppoerd.conf - PPPoE (Point to Point Protocol over Ethernet) relay conﬁguration ﬁle

DESCRIPTION

pppoerd.conf is the conﬁguration ﬁle for the

pppoerd daemon. This ﬁle is read by pppoerd to ini-

tailize the relay. The default ﬁle is

/etc/ppp/pppoerd.conf

. Note that, you cannot run pppoerd

without this conﬁguration ﬁle. Each entry in the

pppoerd.conf ﬁle is separated by a new line. Blank

lines and lines that begin with

# are ignored.

Parameters

pppoerd.conf contains the following parameters:

server-intf Specify the name of the server interface; e,g.:

lan0.

client-intf-list

Specify a list of one or more client interface names.

Sample pppoerd.conf File

server-intf=lan4

client-intf-list=lan2 lan0

AUTHOR

pppoerd.conf was developed by Hewlett-Packard.

FILES

pppoesd PPPoE server daemon

pppoerd PPPoE relay

pppoec PPPoE client

pppd PPP daemon

PAGE 1
pppoerd.conf(4) pppoerd.conf(4) NAME pppoerd.conf - PPPoE (Point to Point Protocol over Ethernet) relay configuration file DESCRIPTION pppoerd.conf is the configuration file for the pppoerd daemon. This file is read by pppoerd to initailize the relay. The default file is /etc/ppp/pppoerd.conf. Note that, you cannot run pppoerd without this configuration file. Each entry in the pppoerd.conf file is separated by a new line. Blank lines and lines that begin with # are ignored. Parameters pppoerd.
PAGE 2
(Notes) A (Notes) pA 2 Hewlett-Packard Company −1− HP-UX 11i Version 3: September 2010