parstatus.1 (2010 09)
p
parstatus(1) parstatus(1)
NAME
parstatus - display information about a hardware partitionable complex
SYNOPSIS
parstatus
[[ -u username [:
] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -s
[[ -u username [:]
-h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -w [-M]
[ -u username [:]
-h IPaddress|hostname ]
parstatus -S
[ -u username [:]
-h IPaddress|hostname ]
parstatus -X
[[ -u username [:
] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -C|-I [-A][-M]
[[ -u username [:] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -B|-P [-M]
[[ -u username [:] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -i I/Ochassis [-i I/Ochassis ]... [-M]
[[ -u username [:] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -c cell [-c cell]... [-V|-M]
[[ -u username [:] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -b cabinet [-b cabinet ]... [-V|-M]
[[ -u username [:] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -p PartitionNumber [
-p PartitionNumber]... [-V|-M]
[[
-u username [:] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
parstatus -T
[[ -u username [:] -h IPaddress|hostname ]
|[
-g -h IPaddress|hostname ]]
Platform Support Remarks
This
parstatus describes functionality on systems not running Onboard Administrator (OA)
based partition management. For parstatus on systems with OA based partition management,
refer to parstatus2 (1) by typing man parstatus2.
DESCRIPTION
The
parstatus command displays information about a system complex. If no arguments are supplied,
all major components that are physically present in the local complex are listed. A specific component
(cell, I/O chassis, cabinet, or partition) may be specified in order to restrict the output to information
about that component. Either the -u option or the -g option can be specified to access a remote complex.
Refer to the nPartition Administrator’s Guide for a description of the partition management terms used
in this man page.
Options and Arguments
parstatus recognizes the following command line options and arguments:
-A Only display the available resources in the complex. If the -A option is used with
other options, an error occurs except when the -A option is used with its related
HP-UX 11i Version 3: September 2010 − 1 − Hewlett-Packard Company 1