evmchmgr.1m (2010 09)

e
evmchmgr(1M) evmchmgr(1M)
NAME
evmchmgr - Event Manager channel manager
SYNOPSIS
/usr/sbin/evmchmgr
[-c config_file ][
-l log_file]
DESCRIPTION
The EVM channel manager is started automatically by the EVM daemon, and usually should not be run
as a stand-alone program. It reads a set of channel definitions from the channel configuration file and
executes the commands defined as the monitor and cleanup functions for any channel, at the configured
intervals. A channel is not required to be configured with either of these periodic functions. However,
the channel manager ignores any channels which do not have either of these functions.
By default, the channel manager reads its configuration from the
/etc/evmchannel.conf
file. To
specify a different configuration file, use the
evmchgmr -c config_file command. If the channel
configuration file is changed while the channel manager is running, use the
evmreload -c command to
instruct the channel manager to reconfigure itself.
The channel manager reconfigures itself when
evmreload -c is run, or upon receipt of a SIGHUP sig-
nal.
Options
-c config_file Sets the configuration file to config_file. The default configuration file is
/etc/evmchannel.conf
.
-l log_file Sets message output to log_file . The default is stderr. When the channel
manager starts, it renames any previous message file by appending .old to its
name, and creates a new file.
RETURN VALUES
The following exit values are returned:
0 Successful completion.
not 0 An error occurred.
FILES
/etc/evmchannel.conf
Default channel configuration file
/var/evm/adm/logfiles/evmchmgr.log
Default channel manager log file
SEE ALSO
Commands
kill(1), evmd(1M), evmreload(1M), evmstart(1M), evmstop(1M).
Files
evmchannel.conf(4).
Event Management
EVM(5).
EVM Events
EvmEvent(5).
Event Filter
EvmFilter(5).
HP-UX 11i Version 3: September 2010 − 1 − Hewlett-Packard Company 1