VERITAS Volume Manager 4.1 Administrator's Guide

Administering Disks
Removing and Replacing Disks
Chapter 2 101
device c0t1d0 and to then use that device to replace the removed or
failed disk mydg02 in disk group mydg.
Continue with operation? [y,n,q,?] (default: y)
• If the disk has already been initialized, press Return at the following prompt to
replace the disk:
VxVM INFO V-5-2-382 The requested operation is to use the
initialized device c0t1d0 to replace the removed or failed disk
mydg02 in disk group mydg.
Continue with operation? [y,n,q,?] (default: y)
Step 5. You can now choose whether the disk is to be formatted as a CDS disk that is
portable between different operating systems, or as a non-portable hpdisk-format
disk:
Enter the desired format [cdsdisk,hpdisk,q,?] (default: cdsdisk)
Enter the format that is appropriate for your needs. In most cases, this is the
default format, cdsdisk.
Step 6. At the following prompt, vxdiskadm asks if you want to use the default private
region size of 2048 blocks. Press Return to confirm that you want to use the default
value, or enter a different value. (The maximum value that you can specify is
524288 blocks.)
Enter desired private region length [<privlen>,q,?] (default: 2048)
Step 7. The vxdiskadm program then proceeds to replace the disk, and returns the
following message on success:
VxVM NOTICE V-5-2-158 Disk replacement completed successfully.
At the following prompt, indicate whether you want to replace another disk (y) or
return to the vxdiskadm main menu (n):
Replace another disk? [y,n,q,?] (default: n)