FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

Error Messages
232 CLI Reference Guide for Directors and Edge Switches
Error 140: Invalid Insistent
Domain ID State
The request cannot be
completed because an
invalid insistent domain
ID state has been
submitted.
The insistent domain ID
state must be set to either
enable or disable.
For more information, see
config.switch.insistDomai
nId on page 96.
Error 141: Invalid
Enterprise Fabric Mode
The request cannot be
completed because an
invalid Enterprise Fabric
Enterprise Fabric mode
has been submitted.
The Enterprise Fabric
mode must be set to either
activate or
deactivate. For more
information, see
config.features.enterprise
FabMode on page 40.
Error 142: Invalid
Domain RSCN State
The request cannot be
completed because an
invalid domain RSCN
state has been submitted.
The domain RSCN state
must be set to either
enable or disable.
For more information, see
config.switch.domainRSC
N on page 95.
Error 143: Domain
RSCNs Must Be Enabled
When Enterprise Fabric
Mode Active
The user attempted to
disable domain RSCNs
while Enterprise Fabric
mode was active.
Domain RSCNs must
remain enabled while the
Enterprise Fabric mode is
active. If Enterprise Fabric
mode is set to inactive, the
domain RSCN state may
be changed. It should be
noted, however, that this
can be disruptive to the
fabric.
Error 144: The
SANtegrity Feature Has
Not Been Installed
The user attempted to
activate a change to the
fabric security
configuration without first
installing the SANtegrity
feature key.
If this key has not been
installed, contact your
sales representative.
Table 5: CLI Error Messages (Continued)
Message Description Action