HP P6000 Continuous Access Implementation Guide (T3680-96431, August 2012)

Figure 51 Dual-fabric replication zone 4-port to 8-port controllers (cross-cabled)
Zone 24 portsZone 23 ports
Site 1 Array controller B port FP2Site 1 Array controller A port FP2
Site 2 Array controller A port FP4Site 2 Array controller A port FP3
Site 2 Array controller B port FP4Site 2 Array controller B port FP3
NOTE: This zoning is used when the 4-port controller pair is configured with FP1 cross-cabled
as shown. The cross cabling configuration shown is applicable to EVA3000/5000 array models
running VCS version 3.xxx. If the cabling configuration for these models is cross-cabled, the zoning
shown is applicable. EVA3000/5000 arrays that use straight cabling should follow the zoning
recommendation shown in Figure 50 (page 93). More recent 4- port controllers (EVA4400) do
not require cross-cabling. Use the zoning applicable for your cabling configuration. It is not
necessary to change an existing straight-cable configuration to a cross-cabled configuration for
HP P6000 Continuous Access.
94 Implementing remote replication