FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

CLI Commands
96 CLI Reference Guide for Directors and Edge Switches
Syntax
insistDomainId insistentDomainIdState
Purpose
This command sets the insistent domain ID state for the switch.
Parameters
This command has one parameter:
Command Example
Root> config switch insistDomainId 1
config.switch.insistDomainId
insistentDomainIdState Specifies whether the insistent domain
ID state is enabled. Valid values are
enable and disable. Boolean 1
and 0 may be substituted as values.