FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

CLI Commands
74 CLI Reference Guide for Directors and Edge Switches
Syntax
wwn portNumber boundWwn
Purpose
This command configures the single device WWN to which a port is bound.
Parameters
This command has two parameters:
config.security.portBinding.wwn
portNumber Specifies the port number for which the bound WWN is
being set. Valid port number values are:
0–15 for the Edge Switch 2/16
0–23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140