FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

config.port.blocked
51CLI Reference Guide for Directors and Edge Switches
Syntax
blocked portNumber blockedState
Purpose
This command sets the blocked state for a port.
Parameters
This command has two required parameters:
Command Examples
Root> config port blocked 4 false
Root> config port blocked 4 0
config.port.blocked
portNumber Specifies the port number. Valid values are:
0–15 for the Edge Switch 2/16
0–23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140
blockedState Specifies the blocked state for the port. Valid
values are true and false.
Boolean 1 and 0 may be substituted as values.