FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

Error Messages
235CLI Reference Guide for Directors and Edge Switches
Error 202: Invalid
Change Authorization ID
The switch will not accept
a change request from
this particular client.
Check that all the
parameters are correct,
and reenter the
command. If problems
persist, contact your
service representative.
Error 203: Another Client
Has Change
Authorization
Another user is currently
making changes to this
switch.
Check that all the
parameters are correct,
and reenter the
command.
Error 207: Change
Request Failed
The switch did not accept
the request.
Check that all the
parameters are correct,
and reenter the
command. If problems
persist, contact your
service representative.
Error 208: Change
Request Timed Out
The authorization time
allowed to make NVRAM
changes has expired.
Check that all the
parameters are correct,
and reenter the
command. If problems
persist, contact your
service representative.
Error 209: Change
Request Aborted
The switch did not accept
the request.
Check that all the
parameters are correct,
and reenter the
command. If problems
persist, contact your
service representative.
Error 210: Busy
Processing Another
Request
A different switch in the
fabric was busy
processing another
request and could not
complete the command.
Check that all the
parameters are correct,
and reenter the
command. If problems
persist, contact your
service representative.
Error 211: Duplicate Zone The entered command
tried to add a zone name
that already exists in the
local zone set.
All zone names must be
unique. Delete or rename
the zone with the
duplicate name before
reentering the command;
or change the name of
the new zone, and reenter
the command.
Table 5: CLI Error Messages (Continued)
Message Description Action