FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)
Error Messages
224 CLI Reference Guide for Directors and Edge Switches
Error 40: Invalid Hour The value of the hour
entered for the new
system time is invalid.
The format of the
time
parameter must be
hh:mm:ss. The hour must
contain an integer in the
range 00–23. Enter a
time, including an hour in
the range 00–23.
Error 41: Invalid Minute The value of the minute
entered for the new
system time is invalid.
The format of the
time
parameter must be
hh:mm:ss. The minute
must contain an integer in
the range 00–59. Enter a
time, including minutes in
the range 00–59.
Error 42: Invalid Second The value of the second
entered for the new
system time is invalid.
The format of the
time
parameter must be
hh:mm:ss. The second
must contain an integer in
the range 00–59. Enter a
time, including seconds in
the range 00–59.
Error 44: Max SNMP
Communities Defined
A new SNMP community
cannot be defined before
removing an existing
community from the list.
A total of six communities
may be defined for
SNMP. Remove at least
one of the current
communities, and then
define the new
community.
Error 45: Not Allowed
While Switch Online
The entered command
requires that the director
or edge switch be set
offline.
Set the director or switch
offline before reentering
the command.
Table 5: CLI Error Messages (Continued)
Message Description Action