FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

show.security.switchBinding
207CLI Reference Guide for Directors and Edge Switches
Syntax
switchBinding
Purpose
This command displays the switch binding configuration.
Parameters
This command has no parameters.
Command Example
Root> show security switchBinding
Output
The switch binding configuration data is displayed as a table that includes the
following properties:
Output Example
The output from the show.security.switchBinding command displays
as follows:
Switch Binding State: Enabled and Restricting E Ports
00:11:22:33:44:55:66:77
88:99:AA:BB:CC:DD:EE:FF
11:55:35:45:24:78:98:FA
show.security.switchBinding
Switch Binding State The switch binding state, which can
have the following values:
Disabled, Enabled and
Restricting F_Ports,
Enabled and Restricting
E_Ports, or
Enabled and Restricting
All Ports
Switch Membership List The active Switch Membership List.