FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

CLI Commands
172 CLI Reference Guide for Directors and Edge Switches
Syntax
traffic portNumber
Purpose
This command displays port traffic counters for a single port.
Parameters
This command has one parameter:
Command Example
Root> perf traffic 2
Output
The port traffic counter data is displayed as a table that includes the following
statistics, along with a wrap count for each corresponding counter:
perf.traffic
portNumber Specifies the port number.
Valid values are:
0–15 for the Edge Switch 2/16
0–23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–143 for the Director 2/140
Port The port number.
Rx% The received link utilization percentage.
Tx% The transmitted link utilization percentage.
RxFrames The number of Fibre Channel Class 2 and Class 3 frames that
the port has received.