HP Superdome 2 Partitioning Administrator Guide

1 Introduction
The HP Integrity Superdome 2 servers (HP Superdome 2) are scalable systems based on blade
system architecture. HP Superdome 2 systems support HP nPartitions and HP-UX Virtual
Partitions (vPars). This administrator guide describes the steps to plan, create, and manage
partitions – nPartitions and virtual partitions – on an HP Superdome 2 system.
This guide is primarily for users who have prior experience in managing nPartitions and virtual
partitions on HP servers.
Conceptual Overview
HP Superdome 2 Onboard Administrator (OA) is the complex management processor, subsystem,
and firmware base used to support HP Superdome 2 complexes and all the managed devices
contained within the complex.
The Onboard Administrator provides a single point from which to perform basic management
tasks on compute enclosures, server blades, IO expansion enclosures or IO interconnects within
the complex. Onboard Administrator helps perform configuration steps for the complex, enables
run-time management and configuration of the complex components, and informs you of problems
within the complex through email, SNMP, or the Insight Display.
For information on setting up the Onboard Administrator, see the the specific HP Superdome 2
User Service Guide.
The following figure depicts the different ways you can interact with the system to manage
partitions. There are primarily three ways you can do partition management on HP Superdome
2 systems.
Conceptual Overview 11