RAID User Guide
Table Of Contents
- Introduction
- RAID technology overview
- Operating systems and devices supported
- Intel Rapid Storage Technology features
- RAID volume setup
- Resetting RAID drives to non-RAID
- Frequently asked questions
- Can more than one RAID volume be installed on a computer?
- Is RAID supported to allow both RAID 0 and RAID 1 on a single RAID volume?
- Can the computer be undocked if the recovery HDD is in the docking station SATA-swappable bay?
- What are the maximum number of HDDs that can be connected to the system during boot when the storage ...
- Index
4. Once the Create Volume button is clicked, you are informed that the array has been created.
Click the OK button. The array migration continues to run in the background. The computer can
be used normally while the migration continues.
5. When you are notified that the array migration has completed, close all open programs and
reboot the computer. When the computer reboots, the operating system detects the newly-
created array and requests another reboot. Reboot the computer when prompted. After the final
reboot, the RAID migration is complete.
Initiate RAID migration using Intel Rapid Storage Technology Console 23