- Hewlett-Packard DeskJet Printer User's Guide

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
33
USING PAPER, CARDS, ENVELOPES, TRANSPARENCIES, AND LABELS
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Using Non-Standard Size Paper
Use this procedure to print on non-standard size papers with
your HP DeskJet 670C Series printer. Paper sizes that are
considered non-standard are those with a width between 5 and
8.5 inches (127 and 215 mm) and a length between 5.83 and
14 inches (148 and 356 mm).
1. Slide the paper width adjuster to its leftmost position.
2. Pull out the paper length adjuster and remove any paper from
the IN tray.
N O TE
Make sure the card guide (used when printing on index cards and postcards) is in
the down position. (See the drawing on page 36 in the procedure Using Index
Cards and Postcards for the location of the card guide.)
3. Remove up to a
1
/
2
inch (1 cm) stack of paper from its package
and tap the short edge of the stack on a flat surface to even the
stack.
4. Insert the non-standard size paper evenly into the IN tray, print
side down, until it stops.
2184037
Paper Length
Adjuster
Paper Width
Adjuster