Operation Manual

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR
22
Table 1.7 Description of Rear Panel
No.
Item
Description
1
VIDEO IN
BNC connector for analog video input.
2
VIDEO OUT
BNC connector for video output.
3
USB Interface
Connects USB mouse or USB flash memory devices.
4
HDMI
HDMI video output.
5
VGA
DB15 connector for VGA output. Display local video output and menu.
6
AUDIO IN
RCA connector for audio input.
7
AUDIO OUT
RCA connector for audio output.
8
LAN Interface
RJ45 10M/100M Ethernet interface.
9
RS-485 Interface
Connector for RS-485 devices. Connect the D+ and D- terminals to T+
and T- of PTZ receiver respectively.
10
12V
12VDC power supply.
11
POWER
Switch for turning on/off the device.
12
GND
Ground (needs to be connected when DVR starts up).
DS-7224/7232HVI-SH and DS-7224/7232HWI-SH:
The rear panel of DS-7232HVI-SH/DS-7232HWI-SH is shown in Figure 1.9.
1
2
3 4 5
6
7
8
9 10 11
12
13
Figure 1.9 Rear Panel of DS-7232HVI-SH and DS-7232HWI-SH
Note: The rear panel of DS-7224HVI-SH/DS-7224HWI-SH provides 24 video input interfaces.
Table 1.8 Description of Rear Panel
No.
Item
Description
1
VIDEO IN
BNC connector for analog video input.
2
VIDEO OUT
BNC connector for video output.
3
USB Interface
Connects USB mouse or USB flash memory devices.
4
HDMI
HDMI video output.
5
VGA
DB15 connector for VGA output. Display local video output and menu.
6
AUDIO IN
RCA connector for audio input.
7
AUDIO OUT
RCA connector for audio output.
8
Alarm In/Out
Connector for alarm input/output.
9
LAN Interface
RJ45 10M / 100M / 1000M Ethernet interface.
10
RS-485 Interface
Connector for RS-485 devices. Connect the D+ and D- terminals to R+ and R-
terminals of PTZ receiver respectively.
11
12V
12VDC power supply.
12
POWER
Switch for turning on/off the device.
13
GND
Ground(needs to be connected when DVR starts up)
DS-7316HFI-SH and DS-7316HWI-SH:
The rear panel of DS-7316HFI-SH and DS-7316HWI-SH DVR is shown in Figure 1.10.