Operation Manual

HEIDENHAIN CNC PILOT 640 457
5.14 Contours in the XY plane
Hole in XY plane
This hole defines a single hole that can contain the following elements:
 Centering
 Core hole
 Countersink
 Thread
You can find the reference dimension ZR and the limit diameter IR
with the "select reference plane" function (siehe Seite 425).
ICP generates:
 The FACE_Y section code with the parameters reference
dimension, spindle angle, and limit diameter. The section code is
omitted for nested contours.
 A G308 with the parameters contour name and hole depth (–1*BT).
 A G370 with the parameters of the hole.
 A G309.
Reference data of hole
ID Contour name
C Spindle angle
IR Limit diameter
ZR Reference dimension
Parameters of the hole
XM, YM Center of hole
Centering
O Diameter
Hole
B Diameter
BT Depth
W Angle
Countersink
R Diameter
UDepth
E Sinking angle
Thread
GD Diameter
GT Depth
K Run-out length
F Thread pitch
GA Thread type (right-hand/left-hand)
 0: Right-hand thread
 1: Left-hand thread