Operation Manual

130 Machine mode of operation

3.13 Conversion into DIN format

The Convert to DIN function enables you to convert a Teach-in

program to a smart.Turn program with the same functionality. You can

then optimize, expand such a smart.Turn program, etc.

Making a conversion

Press the Cycle program --> DIN soft key (in the main

menu)

Select the program to be converted

Press the Cycle program --> DIN soft key (program

selection menu)

The generated DIN program has the same program name as the

Teach-in program.

Should the CNC PILOT encounter any errors during conversion, it

generates an error message and cancels conversion.

If a program with the name used is open in the smart.Turn editor, the

conversion must be confirmed with the Overwrite soft key. The CNC

PILOT

CONVERSION INTO DIN FORMAT