ITEM #0902266 CEILING FAN LIGHT KIT MODEL #LED-WLMW Harbor Breeze® es una marca registrada de LF, LLC. Todos los derechos reservados. Español p. 11 ATTACH YOUR RECEIPT HERE LISTED Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 8 p.m., EST, Monday - Sunday.
TABLE OF CONTENTS Package Contents ..............................................................................................................2 Hardware Contents ........................................................................................................................ 2 Safety Information ...............................................................................................................3 Preparation ................................................................................
SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS. DANGER • For your protection and safety, carefully read and understand the information provided in this manual completely before attempting to assemble, install or operate this product. Failure to do so could lead to electrical shock, fire or other injuries that could be hazardous or even fatal. • DO NOT connect this fixture to an electrical system that does not provide a means for equipment grounding.
SAFETY INFORMATION Modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, (2) this device must accept any interference received, including interference that may cause undesired operation.
ASSEMBLY INSTRUCTIONS The total weight of the light kit is less than 8 lbs. CAUTION: To reduce the risk of fire or electric shock, this light kit fitter (A) should only be used with the compatible ceiling fan models (sold separately) listed below: WCK52NWZ5D, WCK52NWZ5N, WCK52MWW5P, WCK52MWW5NB, WCK52ABZ5P, WCK52ABZ5NB, WCK44NWZ5L1 1. Turn off circuit breakers and wall switch to the fixture supply line leads.
ASSEMBLY INSTRUCTIONS 3. Punch center cap out of switch housing or switch housing cap with a screwdriver (not included). 3 Switch Housing OR Switch Housing Cap 4. Remove hex nut (B) and lock washer (C) from threaded rod on light kit fitter (A). Gently feed wires from light kit fitter (A) through hole in middle of switch housing (see 4a) or switch housing cap (see 4b) followed by lock washer (C) and hex nut (B). Tighten hex nut (B) over lock washer (C) for a secure fit.
ASSEMBLY INSTRUCTIONS 5a. Remove wire connectors from WHITE and BLUE (or BLACK) wires labeled FOR LIGHT in switch housing. Connect WHITE wire from light kit fitter (A) to WHITE wire from fan. Connect BLACK wire from light kit fitter (A) to BLUE (or BLACK) wire from fan. Use wire connectors that were previously removed to make the connections.
ASSEMBLY INSTRUCTIONS 7a. 7b. Align three holes in switch housing with three holes in switch housing plate. [To re-attach switch housing cap, proceed to Step 7b.] Re-attach switch housing with three screws previously removed (Step 2a, page 5). Tighten all screws securely. Align holes in switch housing cap with holes at bottom of switch housing. Re-attach switch housing cap with three screws previously removed (Step 2b, page 5). Tighten all screws securely.
ASSEMBLY INSTRUCTIONS 10. Attach pull chain extension (AA) to light pull chain from light kit fitter (A). Re-attach fan pull chain extension that was previously removed. 10 A Restore power and test light kit. If light does not function, please refer to TROUBLESHOOTING below. AA Hardware Used AA Pull Chain Extension x 1 CARE AND MAINTENANCE IMPORTANT: Shut off main power supply. Wipe with soft damp cloth. Use window cleaner to clean glass. Do not use an abrasive cleaner on glass or fixture.
WARRANTY The distributor warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year from the date of purchase. If within this period the product is found to be defective, take a copy of the bill of sale as a proof of purchase and the product in its original carton to the place of purchase. The distributor will, at its option, repair, replace or refund the purchase price to the consumer.
