Instructions / Assembly

ManualsBrandsHandy Home Products ManualsKitchenGazebo Flower Box Kit

Gazebo Flower Box

10’, 12’ and 14’ Models

Parts List

-BEFORE YOU BEGIN-

■ First...

Read these instructions thoroughly before you begin

assembly.

■ Check all parts

Compare the parts you have to the list, If a part is missing,

circle the part in question and call our toll-free # at

(800)

437-0784

■ Tools Required

❒

Phillips Screwdriver

1-24-03

#16688

■ Optional Tools

❒

Electric Drill with #2 phillips Tip

❒

Drill Bit for Pre-drilling and Drainage Holes

Always wear OSHA-APPROVED safety

glasses throughout the assembly process

■ Staining...

This Flower Box is constructed of a long-lasting

western cedar. Untreated cedar exposed to sunlight will

eventually weather to a silver-grey color. Applying Stain

or Sealers per manufacturers instructions WITHIN 30

DAYS will improve the water resistance of your Flower

Box. Some sanding to remove rough edges and natural

wood stains may be required prior to staining.

PARTS LIST

1 Assembled Flower Box

1 Plastic Insert

Qty. Description

❒

Hardware

- (4) #8 2-1/2” Screws

1-A

Install the Flower Box to the outside of your Gazebo or desired location below the sill as shown. Install (4) 2-1/2”

screws from the inside equally spaced. Insert Plastic Tray.

Note: You may prefer to drill small

drainage holes in tray bottom.

1-A:

Plastic Tray

2-1/2"

Screw

Inside

Flower

Box

Fig. 2

Fig.1