Instructions / Assembly

ManualsBrandsHampton Bay ManualsLampsMix & Match 25.75 in. Biscotti Baluster Table Lamp Base

All Hampton Bay lamp bases and shades (not included) are packaged by color and letter code to indicate the proper size and safety of

matched combinations. To reduce the risk of fire and to avoid the fixture from tipping over, use only these combinations and do not exceed

recommended maximum wattage. Please see the Shade Specifications for alternate shade sizing.

Assembly Instructions

ASSEMBLING THE LAMP

Insert the harp (B) prongs into the saddle (2) and slide the

retaining covers (1) over the joints to secure the harp (B).

Unscrew the finial (A) from the harp (B), then place the shade

(not included) onto the harp (B) and secure with the finial (A).

Install a 100-watt maximum standard type A bulb (not

included) or a Max 23W self-ballasted fluorescent bulb (not

included).

NOTE: The diagram illustrates the assembly of your

new lamp. This is a representative drawing and is not

intended to match the style of your lamp.

Troubleshooting

Problem Possible Cause Corrective Action

The bulb will not light. The bulb is burned out. Replace the light bulb.

The power is off.

The cord is not plugged in.

The circuit breaker is off.

There is an exposed wire.The fuse blows or the circuit breaker trips when

light is turned on.

Ensure the power supply is on.

Ensure the cord is plugged into the outlet.

Ensure the circuit breaker is set to the ON

position.

Discontinue use. Unplug the unit from the wall

and contact a qualified electrician or call the

Customer Service Team at 1-855-HD-HAMPYON.

To ensure your new table lamp is working properly, plug

it into a wall outlet and turn on the switch. Save these

instructions for future use.

Package Contents

Part

Description

Finial

Harp

Base

Quantity

TABLE LAMP

Use and Care Guide

Summary of content (4 pages)

PAGE 1
Use and Care Guide TABLE LAMP All Hampton Bay lamp bases and shades (not included) are packaged by color and letter code to indicate the proper size and safety of matched combinations. To reduce the risk of fire and to avoid the fixture from tipping over, use only these combinations and do not exceed recommended maximum wattage. Please see the Shade Specifications for alternate shade sizing.
PAGE 2
Maintenance 1. Use only a dry soft cloth to dust or wipe carefully. 2. Do not use any cleaners with chemicals, solvents or harsh abrasives. 3. Do not immerse fixture in water. Doing so will damage the wire. Shade Specifications WARNING: ALTERNATE SHADE SIZING. The recommended shades shown on the back of the lamp package are properly sized for use with the lamp. If an alternate shade is used, measurements must be checked according to the Specifications this section.
PAGE 3
Guía de Uso y Mantenimiento LAMPARA DECORATIVA Todas las bases y pantallas (no incluidas), Hampton Bay, están empacadas por color y un código de letra que indica el tamaño adecuado y la seguridad de las posibles combinaciones. Para reducir el riesgo de incendio y evitar la caída de la lámpara, use solo las combinaciones sugeridas y no exceda el watage máximo recomendado. Por favor, refiérase a las especificaciones de las pantallas para tamaños alternativos.
PAGE 4
Mantenimiento 1. Usa sólo un paño suave y seco para desempolvar o limpiar con cuidado. 2. No uses limpiadores con químicos, solventes ni productos abrasivos. 3. No sumergir la lámpara en agua. Si lo hace, se dañaran los cables eléctricos. Especificaciones de las pantallas ATTENCION: TAMANO DE PANTALLA ALTERNATIVA. El tamaño de la pantalla que aparece en la parte de atrás de la caja de la lámpara es el tamaño propiamente recomendado que se debe usar con esta lámpara.