HDC80E1 CONDENSER TUMBLE DRYER USER MANUAL
Technical data 19 For your safety,any instrustions in this manual with this strictly followed. Read the instructions. Caution,risk of fire- this is a safety symbol. Failure to follow the warnings outlined in these user instructions can cause a fire hazard.
THANKS FOR PURCHASING A HAIER PRODUCT Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance. If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the new owner can become familiar with the appliance and safety warnings.
PREPARING THE TUMBLE DRYER Remove all the packing materials to prevent unsteadiness, including the polystyrene base. DESCRIPTION This diagram may be slightly different from the layout of the tumble dryer you have just purchased due to technical improvements.
follow basic precautions,including the following: 1.This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge,unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. 2.
During the drying of the laundry,the condensed water is automatically collected in the water collection tank. This water needs to be removed from the tank after every cycle. If your dryer is in the vicinity of a drain, you may choose to allow the condensed water to be discharged directly into the drain through the drainpipe provided to avoid emptying the tank every time. Note: When using the drain hose, ensure it is not elevated higher than 1m from the base of the dryer.
L Signal button K Delay button Dry level button Temperature level button JL K Child lock display power program is selected,the relevant indicator light is on. Delay button dryer has 16 program options. 9. When the drying Press this button repeatedly before starting the program to enter the time you want the dryer to be started. You can delay it 1 to 19 hours in 1 hour intervals. When passing 19 hours, the delay time will turn off.
Dry level button Press the button to set the final moisture content of the laundry at the end of cycle. Extra: Extra dry Temperature level button Norm: Ready to wear Damp: Ready to iron. Press the button to set the drying temperature for some programs. High: High temperature Med: Middle temperature Low: Low temperature Airing: Cool air L By pressing the “ Temp ”and “signal”buttons for 3 seconds after having started aprogram,the button lock is activated and the icon will light up.
HDC80E1 Synthetic Dry Cotton Dry Extra 8kg *) Normal 8kg Damp 8kg Extra 4kg Normal 4kg Damp 4kg shirt / Shirts 2kg Mix / Heavy fabrics, need further drying 4kg Towel / Towels 4kg Bedding / Sheets 4kg 11 Jeans / Jeans 2kg 12 Sport / Sportswear 2kg 13 Refresh / Microfiber fabrics 2kg Underwear / Underwear 2kg 15 Express 30 / Heavy fabrics, need further drying 4kg 16 Baby Care / Baby clothing 4kg 14 The Extra program is “Energy test program”, it is
HDC80E1 12 8 16 2100 1800 845x648x595 Power consumrtion of the off-mode (W) 0.02 Power consumrtion of the left-on mode (W) 0.
Do not dry silk,feather down and other delicate fabrics to avoid damage to the laundry. There are many items that would benefit from being dried on a drying rack. For example items like sport shoes, soft toys, hats and woollen items that may be shoes, damaged if they are tumbled. A drying rack is installed in your dryer when it leaves the factory. To remove it, tilt the top of the rack towards you to detach the legs from the slots in the lint filter, and gently remove from the drum.
Temp Dry Level Signal Anti-Crease Delay Start/Pause machine
The tumble dryer is not to be used if industrial chemicals have been used for cleaning.
DISPLAY CODES the “Tank” is light the water tank is full F2 F31 NTC1 F32 NTC2(near the heater F5 Communication breakdown E6 Clean the tank.
D NTC1 SW L H G N PCB C LA PUL M HT NTC2 D: Door switch NTC1: Temperature sensor NTC2: Temperature sensor SW: Water level senser Humidity sensor H: LA: PUL: M: HT: C: lamp Drainage Pump Motor Heating Element Capacitor 8uf
English
